110-277VAC Non dimmable constant voltage 24v 200W led driver inside junction box
200W constant voltage LED driver PFC function Metal housing design, good heat dissipation, built-in fine-tuning voltage function knob. Can compensate for the light decay of the lamp, and solve the voltage drop problem caused by wiring.
Specification
| Model | SMT-12200-ND-y | SMT-24200-ND-y | SMT-36200-ND-y | SMT-48200-ND-y | |
| Note: | y. can be A=(Aluminum), J=(Junction Box) | ||||
| Output | DC Voltage | 12V | 24V | 36V | 48V |
| Fine-tune Volt. Range | 12V | 24V | 36V | 48V | |
| Rated current | 12-13.5V | 24-26V | 36-38V | 48-50V | |
| Rated power | 200W | ||||
| Voltage Tolerance | ±0.5V | ||||
| Voltage Regulation | ≤1% | ||||
| Load Regulation | ≤3% | ||||
| Input | Voltage Range | 110-277VAC | |||
| Frequency Range | 47 - 63Hz | ||||
| Power Factor@ full load | ≥0.95 | ||||
| Standby power Consumption | ≦0.5W | ||||
| THD(Typ.) @ full load | ≤20%@120VAC | ||||
| Efficiency @ full load |
≧87%@120VAC ≧90.5%@277VAC |
≧90%@120VAC ≧93%@277VAC |
≧90%@120VAC ≧93.5%@277VAC |
≧90%@120VAC ≧92.5%@277VAC | |
| AC Current (Max.) | 2.4A | ||||
| Inrush Current (Typ.) | 68A@50%Ipeak 208us @120VAC,100A@50%Ipeak 452us @277VAC. | ||||
| Protection | Short Circuit | Hiccup mode, recovers automatically after fault condition is removed | |||
| Over Load | ≤120% , Hiccup mode, recovers automatically after fault condition is removed | ||||
| Over temperature | Shell surface temp.100℃±10℃ shut down o/p voltage, automatically recover after cooling | ||||
| Environment | Working TEMP. | -40~+60℃ (see below derating curve) | |||
| Working Humidity | 20 - 95%RH non-condensing | ||||
| Storage TEM.,Humidity | -40 - +80℃,10 - 95% RH non-condensing | ||||
| TEMP.coefficient | ±0.03%/℃(0 - 50℃) | ||||
| Vibration | 10~500Hz, 5G 12min./1 cycle, period for 72min. each along X,Y,Z axes | ||||
| Safety & EMC | Safety standards | UL8750 CAN/CSA-C22.2 No.250.13(US) | |||
| Withstand voltage | I/P-O/P:1.88KVac;I/P-FG::1.88KVac;O/P-FG:1.88KVac | ||||
| Leakage current | ≦0.5mA | ||||
| Isolation resistance | I/P-O/P: 100MΩ/ 500VDC/ 25℃/ 70% RH | ||||
| Lightening &Surge current | OD线对线: 2KV | OD线对线: 2KV , ED线对地:4KV | |||
| EMC Emission | FCC Part15 Subpart B | ||||
| Friency | Friency testing standard | IEEE1789 | |||
| Others | Net Weight | 795g(Aluminum IP67 Case) / 1225g(Junction Box) | |||
| Dimension | 188*61.4*25.5mm(Aluminum) / 188.0*95.4*42.7mm(junction Box) | ||||
| Packing | ?/pcs /CTN | ||||
| Notes | 1. All parameters NOT specially mentioned are measured at 120VAC input, rated load and 25℃of ambient temperature. | ||||
| 2. Tolerance: includes set up tolerance and load regulation . | |||||
|
|
 |
 |
 |
Mechanical Specification
1.Input 1015 0.824mm2 3*18AWG: Black cable (L), White cable (N), Green cable (G).
2.Output 1015 0.824mm2 2*18AWG: Red cable(V+) connect to positive(+), Black cable(V-) connect to negative(-).
3.Please make sure your connect these correctly otherwise your product will not function correctly and could be damaged.
Dimming Operation
1.To extend their life, please refer to the Derating Curve and derate according to the temperature.
2.Please note that the rise in temperature of LED fixtures over a long period of time will cause their power to rise.
Therefore, we recommend the power supply to reserve a certain amount of load to avoid overloading.
Related Products
|
Aluminum housing design with waterproof grade ip67, constant voltage led driver 200W. It is effectively waterproof and dustproof. Suitable for outdoor led driver lighting project installation. With 5-year warranty
Model: SMT-012-200VW Input Voltage: 100-277vac
Dimming Mode: Non dimmable
|
