120 277v canada 12v ul approved led power supply triac dimmable driver
outdoor 12v dc power supply SMT-012-180VTHW2 plastic case IP67 waterproof design for dry or damp or wet environment installations, dimmable with an electronic low voltage dimmer: (Lutron Diva DVELV-300P, Lutron Skylark SELV-300P, or Lutron Maestro MAELV-600).
Specification
model
SMT-012-180VTHW2
SMT-024-192VTHW2
Output
DC Voltage
12V
24V
Voltage Accuracy
±0.5V
±0.5V
Rated current
15.0A (3*5A)
8.0A (2*4A)
Rated power
180W
192W
Voltage Tolerance
±0.5V
±0.5V
Load Regulation
±1%
±1%
Voltage Regulation
±0.5%
±0.5%
Input
Voltage Range
100~277V AC
Frequency Range
47～63HZ
THD(Typ.) @full load
<20%
Power Factor ( Typ.）
0.98@120VAC 0.95@277VAC
0.98@120VAC 0.95@277VAC
Full Load Efficiency(Typ.)
86%@120V 88%@277VAC79%
87%@120V 89%@277VAC
AC Current（Typ.）
2.2A@100VAC
2.3A@100VAC
Inrush Current （Typ.）
19A ,50%,1.3ms @120VAC ; 38A,50%,960us @277VAC
Leakage current
﹤0.50mA
Protection
Short Circuit
Hiccup mode, recovers automatically after fault condition is removed.
Over temperature
100℃±10℃ shut down o/p voltage, automatically recover after cooling.
Over Loading
≤120% constant current limiting, auto-recovery
Over voltage
≦140VAC(90~135V) , ≦270VAC(170~265V)
Environment
Working TEMP.
-40～+60℃
Working Humidity
20～90%RH,non-condensing
Storage TEM.,Humidity
-40～+80℃，10～95%RH
TEMP.coefficient
±0.03%/℃（0～50℃）
Vibration
10～500Hz，2G 10min./1 cycle，period for 60min.each along X,Y,Z axes
Safety&EMC
Safety standards
UL8750+UL1310
Withstand voltage
I/P-O/P:1.88KVAC
Isolation resistance
I/P-O/P：100MΩ/500VDC/25℃/70%RH
EMC EMISSION
FCC 47 CFR Part 15 ,Subpart B
EMC IMMUNITY
Compliance to EN55015; EN61000-4-2,3,4,5,6,8,11,EN61547
Alight industry level （surge4KV）
Others
Net Weight
1.7Kg
Size
276*78*47mm (L*W*H)
packing
329*279*176mm , 10PCS/ctn
Notes
1. All parameters NOT specially mentioned are measured at 110V/277VAC input , rated load and
25℃of ambient temperature.
2. Tolerance:includes set us tolerance,line regulation and load regulation .
 |
 |
 |
 |
Mechanical Specification
Input wire 18AWG Black and White to be connected to AC L and N ,Green wire go ground
Outputcable 2*16AWG,Red" (+) to LED Positive side (+) , "Black"(-) to LED Negative side
Compatible Dimmer Type
Support trailing edge (ELV) dimming, ABS material, high flame retardant, suitable for led triac dimmable driver, incandescent lamps, halogen lamps, installation in bedroom, restaurant, bars and other places need dimming control.
Related Products
|
120 277v led driver class 2 LED Power Supply accepts input voltage of 120 volts AC and outputs 24 volts DC power up to 36 watts. Features short circuit and overload protection.
Mode：SMT-012-060VTHV2 intput voltage：100~277V AC pfc > 0.99 Size：188*94.5*40mm （L*W*H） UL/cUL,FCC,RoHS approval |
