12v 30w ac to dc led power supply for led light CE led driver
|
Smarts SMT-012-030VWP 160×57.6×18.4 small size, 85g light weight, Can replace the power supply of TORCHSTAR Basic led floodlight.plastic case non-isolate led power supply. ac to dc led power supply for your LED lighting project is easy to calculate. |
|
Feture |
Label for 30w led driver |
|
● IP20 design for indoor installations ● Protections:Short circuit/Overload/Over temperature ● Cooling by free air convection ● 100% full load burn-in test ● Suitable for LED lighting ● Products through CE Certification ● 2 years warranty |
 |
Specification
MODEL
SMT-012-030VWP
SMT-024-030VWP
OUTPUT
DC VOLTAGE
12V
24V
RATED CURRENT
1.5Amp
1.25Amp
VOLTAGE RANGE
RATED POWER
30Watt
30Watt
RIPPLE&NOISE(max)
300mV
300mV
VOLTAGE TOLERANCE
±5%
±5%
LINE REGULATION
±1%
±1%
LOAD REGULATION
±2%
±2%
INPUT
VOLTAGE RANGE
100-265VAC
100-265VAC
FREQUENCY RANGE
47-63Hz
47-63Hz
POWER FACTOR(Typ.)
EFFICIENCY(Typ.)
>83%
>84%
AC CURRENT(Typ.)
0.31A/110VAC, 0.17A/220VAC
PROTECTION
SHORT CIRCUIT
Protection type:recovers automatically after condition is removed
OVER CURRENT
overload protected@145-160% above peak rating
OVER VOLTAGE
Protection type:Shut down o/p voltage,re-power on to removed
ENVIRONMENT
WORKING TEMP.
-10~+50℃ (Refer to output load derating curve)
WORKING HUMIDITY
20~99% RH non-condensing
STORAGE TEMP.,HUMIDITY
-40~+80℃,10~99%RH
SAFETY&EMC
SAFETY STANDARDS
EN61347-1;EN61347-2-13; CE /ROHS approval
WITHSTAND VOLTAGE
I/P-O/P:2KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
EMC Test Standards
EN55015;EN61000-3-2;EN61000-3-3;
EN61547;EN61000-4-2,3,4,5,6,8,11;
 |
 |
 |
 |
Question
Do all of these units have protection from thermal overload (excessive heat), voltage overload, short circuit, and power surge?
Answer
Yes, all of those units have the protection from thermal overload (excessive heat), voltage overload, short circuit, and power surge.
Mechanical Specification
