12v 60 watt power supply 100-240vac
This SMT-012-060VWP 60 watt power supply is a reliable power source for LED strips and any other devices with power less than 60W and running voltage at 12V (DC). 12V led driver 60W with load function has a longer service life than meanwell 60W led power supply.
Features
|
Label for led power supply 60w
|
● IP20 design for indoor installations ● Protections:Short circuit/Overload/Over temperature ● Cooling by free aiconvection ● 100% full load burn-in test ● Suitable for LED lighting ● Products through CE,RoHS Certification ● 2 years warranty |
|
Specifications for 240 volt led power supply:
MODEL | SMT-012-060VWP | SMT-024-060VWP | |||
OUTPUT | DC VOLTAGE | 12V | 24V | ||
RATED CURRENT | 5.0Amp | 2.5Amp | |||
VOLTAGE RANGE | 0-5.0A | 0-2.5A | |||
RATED POWER | 60Watt | ||||
RIPPLE&NOISE(max) | 300mV | ||||
VOLTAGE TOLERANCE | ±5% | ||||
LINE REGULATION | ±1% | ||||
LOAD REGULATION | ±2% | ||||
INPUT | VOLTAGE RANGE | 100-265VAC | |||
FREQUENCY RANGE | 47-63Hz | ||||
POWER FACTOR(Typ.) |
|
|
|
|
|
EFFICIENCY(Typ.) | ﹥83% | ||||
AC CURRENT(Typ.) | 0.69A/110VAC, 0.34A/220VAC | 0.69A/110VAC, 0.34A/220VAC | |||
PROTECTION | SHORT CIRCUIT | Protection type:recovers automatically after condition is removed | |||
OVER CURRENT | overload protected@145-160% above peak rating | ||||
OVER LOAD | 5.7A | 3.2A | |||
OVER VOLTAGE | Protection type:Shut down o/p voltage,re-power on to removed | ||||
ENVIRONMENT | WORKING TEMP. | -10~+50℃ (Refer to output load derating curve) | |||
WORKING HUMIDITY | 20~99% RH non-condensing | ||||
STORAGE TEMP.,HUMIDITY | -40~+80℃,10~99%RH | ||||
SAFETY&EMC | SAFETY STANDARDS | EN61347-1;EN61347-2-13; CE /ROHS approval | |||
WITHSTAND VOLTAGE | I/P-O/P:2KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC | ||||
EMC Test Standards | EN55015;EN61000-3-2;EN61000-3-3; | ||||
EN61547;EN61000-4-2,3,4,5,6,8,11; |
Noted for led power supply 60w
1.All parameters NOT specially mentoned are measured at 110V,220VAC input,rated load and 25℃ of ambient temperature.
2.Ripple&noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf&10uf parallel capacitor.
3.Tolerance:includes set up tolerance,line regulation and load regulation.
Question
1. can you please confirm lead time?
Answer
Lead time for sample order takes about 7 working days. It takes about 12-15 working days for production order. It depends on the quantities.