24v constant voltage 60w led driver for led lighting
SMT-024-060VWP class 2 constant voltage 24v constant voltage led driver which is Input:100~240vAC / 47-63HZ,Output : 24V @2.5A 60W, Energy transfer: AC-DC, 2 years warranty led driver.
Product video
Label for 60w led driver:
Specification
MODEL
SMT-012-060VWP
SMT-024-060VWP
OUTPUT
DC VOLTAGE
12V
24V
RATED CURRENT
5.0Amp
2.5Amp
VOLTAGE RANGE
0-5.0A
0-2.5A
RATED POWER
60Watt
60Watt
RIPPLE&NOISE(max)
300mV
300mV
VOLTAGE TOLERANCE
±5%
±5%
LINE REGULATION
±1%
±1%
LOAD REGULATION
±2%
±2%
INPUT
VOLTAGE RANGE
100-265VAC
100-265VAC
FREQUENCY RANGE
47-63Hz
47-63Hz
POWER FACTOR(Typ.)
EFFICIENCY(Typ.)
﹥83%
﹥83%
AC CURRENT(Typ.)
0.69A/110VAC, 0.34A/220VAC
0.69A/110VAC, 0.34A/220VAC
PROTECTION
SHORT CIRCUIT
Protection type:recovers automatically after condition is removed
OVER CURRENT
overload protected@145-160% above peak rating
OVER LOAD
5.7A
3.2A
OVER VOLTAGE
Protection type:Shut down o/p voltage,re-power on to removed
ENVIRONMENT
WORKING TEMP.
-10~+50℃ (Refer to output load derating curve)
WORKING HUMIDITY
20~99% RH non-condensing
STORAGE TEMP.,HUMIDITY
-40~+80℃,10~99%RH
SAFETY&EMC
SAFETY STANDARDS
EN61347-1;EN61347-2-13; CE /ROHS approval
WITHSTAND VOLTAGE
I/P-O/P:2KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
EMC Test Standards
EN55015;EN61000-3-2;EN61000-3-3;
EN61547;EN61000-4-2,3,4,5,6,8,11;
NOTE
1.All parameters NOT specially mentoned are measured at 110V,220VAC input,rated load and 25℃ of ambient temperature.
2.Ripple&noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf&10uf parallel capacitor.
3.Tolerance:includes set up tolerance,line regulation and load regulation.
Applications:
Question:
Can ordinary power supply be operated at low temperature? To work in the outdoor -40C, how long is the warranty period?
Answer:
Do not work at ultra-low temperatures. -40 It's too cold. The startup will be abnormal. A typical power supply is at the limit of -20 degrees. If you are low, it will not start or work abnormally.
To achieve ultra-low temperature, you need to change the special large capacitor at the input to reach about -30 degrees.