12VDC LED power supply factory 150w electronic led driver USA
SMT-012-150VTDHV2 150w electronic led driver has better dimming effect than LEDlightinginc model TDIMDRIVER-150W.
Specification
model |
SMT-012-150VTDHV2 (1.0 version) SMT-012-150VTDHWV2 (2.0 version) |
SMT-024-150VTDHV2 (1.0 version) SMT-024-150VTDHWV2 (2.0 version) |
||
Output |
DC Voltage |
12V |
24V |
|
Voltage Regulation |
±0.5% |
|||
Rated current |
12.5A |
6.25A |
||
Voltage Tolerance |
±0.5V |
|||
Load Regulation |
±2% ±1% |
±2%
|
||
Rated power |
150W |
150W |
||
Input |
Voltage Range |
110-277VAC |
||
Frequency Range |
47-63Hz |
|||
Power Factor@ full load |
0.98@120VAC 0.95@277VAC |
0.99@120VAC 0.94@277VAC |
||
THD(Typ.)@ full load |
<20% |
|||
Efficiency @ full load |
85% @120Vac 86%@277Vac 79% |
85% @120Vac 87%@277Vac
|
||
AC Current(Max.) |
1.8A@100Vac |
|||
Inrush Current (Typ.) |
15A, 50%, 1.4ms @120Vac 30A, 50%, 1.4m,s @277Vac |
|||
Leakage current |
<0.50mA |
|||
protection |
Short Circuit |
shut down o/p voltage, re-power on to recover after fault condition is removed |
||
Over Loading |
≤120% constant current limiting, auto-recovery |
|||
Over temperature |
100℃±10℃ shut down o/p voltage, automatically recover after cooling.
|
|||
Environment |
Working TEMP. |
-40~+60℃ (see below derating curve) |
||
Working Humidity |
20~90%RH, non-condensing |
|||
Storage TEMP. Humidity |
-40~+80℃,10~95%RH |
|||
TEMP .coefficient |
±0.03%/℃(0~50℃) |
|||
Vibration |
10~500Hz, 5G 10min./1 cycle,period for 60min. each along X,Y,Z axes |
|||
Safety&EMC |
Safety standards |
UL8750+UL1310 |
||
Withstand voltage |
I/P-O/P:1.88KVAC |
|||
Isolation resistance |
I/P-O/P:100MΩ/500VDC/25℃/70%RH |
|||
EMC EMISSION |
FCC Part 15 B |
|||
Others |
Weight |
About 1.8Kg |
||
Size |
1.0 version: 260*105*45mm / 2.0 version: 260*125*45mm (L*W*H) Tolerance: 0.5-2mm 1.0 version: SMT-012-150VTDHV2 / SMT-024-150VTDHV2 |
|||
packing |
10PCS/CTN (L*W*H) |
|||
Notes |
1. All parameters if NOT specially mentioned are measured at 120VAC input , rated load and 25℃of ambient temperature. 2. To extend the driver's using life ,please reduce the loading at lower input voltage. |
Mechanical Specification
Input terminals "Black" and "White" to connect to AC L and N.
Output terminals "Red" to LED Positive side (+) , "Black" to LED Negative side (-).
Compatible well with LED light bar
SMT-012-150VTDHV2 150w driver led 150w 120v can be used with Nilight LED SKU 600537972865, 7years warranty.
Related Products
Smarts Electronics, as a 12v led power supply factory, we are focusing on UL/ETL listed led driver, which is high PF, high efficicency type led driver, dimmable and non dimmable type.
Mode:SMT-012-100VTDHV2 intput voltage:100~277V Efficiency > 88% Size:220*94.5*40mm (L*W*H) Weight:1.3 Kg/pcs |
|