led driver 24v with High reliability and save energy,protected environment. 42W driver can save cost more than meanwell 24V led driver 42W at the same power.High stability and low ripple, increase light efficiency and decrease light attenuation
|
Product video |
Label for 42w led driver |
 |
Specification
MODEL
SMT-012-042VWP
SMT-024-042VWP
OUTPUT
DC VOLTAGE
12V
24V
RATED CURRENT
3.5Amp
1.75Amp
VOLTAGE RANGE
RATED POWER
42Watt
42Watt
RIPPLE&NOISE(max)
300mV
300mV
VOLTAGE TOLERANCE
±5%
±5%
LINE REGULATION
±1%
±1%
LOAD REGULATION
±2%
±2%
INPUT
VOLTAGE RANGE
100-240VAC
100-240VAC
FREQUENCY RANGE
47-63Hz
47-63Hz
POWER FACTOR(Typ.)
EFFICIENCY(Typ.)
﹥83%
﹥84%
AC CURRENT(Typ.)
0.48A/110VAC, 0.25A/220VAC
0.48A/110VAC, 0.25A/220VAC
PROTECTION
SHORT CIRCUIT
Protection type:recovers automatically after condition is removed
OVER CURRENT
overload protected@145-160% above peak rating
OVER VOLTAGE
Protection type:Shut down o/p voltage,re-power on to removed
ENVIRONMENT
WORKING TEMP.
-10～+50℃ (Refer to output load derating curve)
WORKING HUMIDITY
20～99% RH non-condensing
STORAGE TEMP.,HUMIDITY
-40～+80℃,10～99%RH
SAFETY&EMC
SAFETY STANDARDS
EN61347-1;EN61347-2-13; CE /ROHS approval
WITHSTAND VOLTAGE
I/P-O/P:2KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
EMC Test Standards
EN55015;EN61000-3-2;EN61000-3-3;
EN61547;EN61000-4-2,3,4,5,6,8,11;
NOTE
1.All parameters NOT specially mentoned are measured at 110V,220VAC input,rated load and 25℃ of ambient temperature.
2.Ripple&noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf&10uf parallel capacitor.
3.Tolerance:includes set up tolerance,line regulation and load regulation.
Question:
1. Do you have mounting packs(screws/washers) for the junction boxes?
Answer:
Each two sides of our junction box have mounting packs for the junction box.
Enclosed kindly please check the picture of the mounting packs for the junction box.
