led driver constant current are designed to specify a range of output voltages and a fixed output current (mA). LEDs rated to operate on constant current drivers require A specified current supply, usually in milliamperes (mA) or amperes (A). Constant current LED drivers have similar power ratings, but have fixed amplifier (a) or milliampere (MA) values for voltage or maximum voltage range. LED eq...
Yes, we have wireless bluetooth SIG mesh dimmable 12v constant voltage led driver. Available wattage with 60w, 96w, 100w, 120w, 150w, 200w options. Input voltage is 110-277Vac, output voltage with 12Vdc, 24Vdc, 48Vdc options. All models with 5 channels, include DW, CCT, RGB, RGBW, RGBCW. Output current is equal divising to each channel. Wirless 12v led driver will get CE UL/cUL, FCC, ROHS certific...
a, In the early, DMX512 dimming power supply itself has own dial switch, and the ID address of each DMX power supply can be set by calculation on the power supply. b, Write the ID address code of each DMX power supply in the software of the DMX control system. c. The current DMX power supplies have integrated high-voltage input solutions, and basically all come with RDM functions. We can use the R...
As the popular use of LED Lighting, there are kinds of dimmable driver in market, like triac dimmable , 0-10v dimmable, DALI dimmable, the most efficient dimmable driver would be DMX512 dimmable. Hidea Power manufacture DMX512 drivers in 12v 24vdc driver , wattage from 30w to 300w constant voltage power supply. Here we list the product features : 1. slim size: basically adopt a thin shell de...
1.Incorrect connection of output and output wire * Connect AC to the DC output terminal of the ac dc led driver, causing the drive power supply to fail; *Connect AC to the input or output of the DC/DC drive , causing the drive power supply to fail *Connect the constant current output terminal and the dimming light together, causing the drive power to fail; *The phase wire is connected to the groun...
The difference between a wide input 100-277vac led power supply and an 180-265vac led power supply is: the voltage output range is different, the adaptability to the power source is different, and the lack of power is different. The voltage output range is different 1. Wide power supply: The wide power supply voltage output range is generally in the standard of 85~265VAC. 2. Ordinary power supply:...
PWM dimming system (Pulse Width Modulation System Module) is a control system. This kind of PWM (Pulse Width Modulation) system can be connected to a computer for control, but the dimming can be achieved directly through the PWM system in most cases, no need to connect to a computer. The PWM dimming system can control multiple lines of dimming, and can load thousands (million) wattages of 0-...
There is no doubt that TRIAC dimming led driver is the most widely used in practical applications. The dimming used in traditional lighting is basically Triac. In addition, for decades, electricians have used traditional methods for the circuit wiring of floors and houses, and they have not considered leaving a few more control lines. Therefore, lighting comes in only after the water and electrici...
UL LED drive power supply is the key to LED lamps. It is like a person's heart. To manufacture high-quality LED lamps for lighting, you must abandon constant voltage LEDs. LED transformer is the best way to drive LEDs. It uses constant current source to drive. There is no need to connect a current-limiting resistor in the output circuit. The current flowing through the LED is not affected by chang...
Wiring a red LED strip (or any other monochromatic LED strip) couldn't be easier. Just connect your 100-277Vac main best led power supply (+ve and -ve cables) to the input terminal of the led strip driver, and then connect the starter leads of the LED light bar (again +ve and -ve) to the led strip driver output terminals. For more guidance, please refer to the "Power Supply for a Monochrome LED St...