CE ROHS approval 12v 24v 60w slim waterproof electronic power supply led driver
12v 24v led slim driver this item is CE RoHS compliant and conforms to all EU safety standards.Our DALI dimmable LED drivers comtabile well with most of brands of Triac/Phase-Cut/MLV/ELV) dimmers (Brand: Lutron, Leviton,Clipsal, HDL, ABB, DALITEK etc.
Specification
|
model |
SMT-012-060VMSW |
SMT-024-060VMSW |
|
|
Output |
DC Voltage |
12VDC |
24VDC |
|
|
Voltage Accuracy |
±5% |
±5% |
|
|
Rated current |
5Amp |
2.5Amp |
|
|
Rated power |
60W |
60W |
|
|
Voltage Regulation |
±0.5% |
|
|
|
Load Regulation |
±1% |
|
|
Input |
Voltage Range |
100-277 VAC |
|
|
|
Frequency Range |
47～63HZ |
|
|
|
Power Factor ( Typ.） |
PF≧0.99/110V ; PF≧0.98/277V |
|
|
|
THD(Typ. ) @ full load |
<10%@120VAC <15%@277VAC |
|
|
|
Full Load Efficiency（Typ.） |
>84% |
>85% |
|
|
AC Current（Typ.） |
0.5A |
|
|
|
Inrush Current（Typ.） |
5A, 50%, 960us @120VAC; 13A, 50% , 1ms @277VAC |
|
|
|
Leakage current |
<0.5mA |
|
|
Protection |
Short Circuit |
Hiccup mode, recovers automatically after fault conditionis removed. |
|
|
|
Over Loading |
≤120% shut down o/p voltage, re-power on to recover |
|
|
|
Over temperature |
100℃±10℃ shut down o/p voltage, automatically recover after cooling. |
|
|
Environment |
Working TEMP. |
-40～+60℃ |
|
|
|
Working Humidity |
20～90%RH,non-condensing |
|
|
|
Storage TEM.,Humidity |
-40～+80℃，10～95%RH |
|
|
|
TEMP.coefficient |
±0.03%/℃（0～50℃） |
|
|
|
Vibration |
10～500Hz, 5G 10min./1 cycle,period for 60min. each along X,Y,Z axes |
|
|
Safety&EMC |
Safety standards |
UL8750 +UL 1310, CAN/CSA-C22.2 No.250.13 |
|
|
|
Withstand voltage |
I/P-O/P:1.88KVAC |
|
|
|
Isolation resistance |
I/P-O/P:100MΩ/500VDC/25℃/70%RH |
|
|
|
EMC EMISSION |
FCC 47 CFR Part 15 ,Subpart B |
|
|
|
EMC IMMUNITY |
Compliance to EN61000-4-2,3,4,5,6,,11, Alight industry level |
|
|
Others |
Weight |
0.35Kg |
|
|
|
Size |
260*32*20mm (L*W*H) |
|
|
|
packing |
290*270*160mm , 50PCS/CTN |
|
|
Notes |
1. All parameters NOT specially mentioned are measured at 110VAC, 277VAC input , Rated load and 25℃of ambient temperature. 2. Tolerance: includes set up tolerance, line regulation and load regulation . 3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again. |
||
| Label |
 |
||
 |
 |
 |
 |
Analysis problem
Question:
What is class 2 standard?
Answer:
the requirements of class 2 are :1. less than or equal to 5A 2. less than 100w. And should satisfied with these two conditions at the same time.
Application
Our products are widely used in various industries, such as:
- INdoor LED illuminating lights,
- LED Neon,
- LED City Decoration,
- LED Lighting Advertising,
- LED Display,
- Safety Protection Apparatus,
- Telecommunications,
- Networks,
- Vehicle Lights,
- Controller Panels, etc
