It is very rare that a power led driver with good quality damages because of a manufacturing fault. In most cases the damage is caused by a problem with the installation, or there are some environmental factors at play. But how we could do if there have some troubleshooting happened during installation? Following are some condition you may have for your led driver/ led lights projects.

Condition 1: Fixture does not illuminate

•  Make sure the light dimmer has the proper input, output voltage, current and wattage for your application. Make sure the led lights system is wired correctly and polarities are correct.

• Make sure a compatible led power driver and led lights fixture is installed.

Condition 2: LED Lighting does not dim

• Make sure a compatible led power driver and led lights fixture is installed.

• Make sure a compatible light dimmer is installed and wired correctly.

Cotact with Sales on Swinpower for more details for the dimmer list recommendation.

Condition 3:  Different led lights fixture types do not dim in synchronous

• Different led lights fixture types may have different designs on circuit and may react differently when dimmed. Make sure each led lights fixture type is installed on a individual driver for best dimming function.

Condition 4: Fixture is quickly flashing or flickering

• Make sure a compatible led lights fixture is installed.

• Make sure a compatible dimming control is installed.

• Make sure all connections are properly secured.

• Make sure fixture is receiving the correct input voltage.

• Make sure different lights fixture types can not connected to a single driver. Different fixture types must be connected to separate drivers.

Condition 4: Fixture is slowly flashing

•  Make sure driver is not overloaded. Driver overload may cause the internal auto-reset to trip repeatedly.