led power supply 24v dc 60w led driver with 5 years warranty
An input voltage of 180-265vac, rated power is 60w. This waterproof led power supply 24v can be used to run back-lit ad signs, architecture lighting, landscape lighting and more. The EMC EMISSION comply with EN55015,EN61000-3-2 (≧50%load).
model
SMT-012-060VT
SMT-024-060VT
Output
DC Voltage
12V
24V
Voltage Accuracy
±0.5V
±0.5V
Rated current
5.00A
2.50A
Rated power
60W
60W
Input
Voltage Range
90~135V AC/170～265V AC
Frequency Range
47～63HZ
Power Factor ( Typ.）
PF≧0.78/110V,PF≧0.80/170V,PF≧0.81/220V,PF≧0.82/265V
Full Load Efficiency（Typ.）
>83%
>83%
AC Current（Typ.）
0.61A/110VAC, 0.58A/170VAC, 0.46A/220VAC, 0.41A/265VAC
Leakage current
﹤0.25mA/110V/220VAC
Protection
Short Circuit
Hiccup mode, recovers automatically after fault condition is removed.
Over voltage
≦140VAC(90~135V) , ≦270VAC(170~265V)
Environment
Working TEMP.
-40～+60℃
Working Humidity
20～90%RH,non-condensing
Storage TEM.,Humidity
-40～+80℃，10～95%RH
TEMP.coefficient
±0.03%/℃（0～50℃）
Vibration
10～500Hz，2G 10min./1 cycle，period for 60min. each along X,Y,Z axes
Safety&EMC
Safety standards
EN-60950-1, EN61347-1/-2/-13
Withstand voltage
I/P-O/P:3.75KVAC
Isolation resistance
I/P-O/P：100MΩ/500VDC/25℃/70%RH
EMC EMISSION
Compliance toEN55015,EN61000-3-2 (≧50%load)
EMC IMMUNITY
Compliance to EN55015; EN61000-4-2,3,4,5,6,8,11, EN61547 Alight industry level （surge4KV）
Others
Weight
About 1.0Kg
Size
210*68.5*43mm（L*W*H）
packing
324*298*176mm （L*W*H）
Notes
1. All parameters NOT specially mentioned are measured at 110V/230VAC input , rated load and
25℃of ambient temperature.
2. Ripple& noise are measured at 20MHz of bandwidth by using a 12”twisted
pair-wire terminated with a 0.1uf &47uf parallel capacitor.
3. Tolerance:includes set us tolerance,line regulation and load regulation .
Label
