English

banner

UL cUL DALI 2 push 24vdc dimmable LED strip driver waterproof IP67 led power supply 300w

DALI 2 dimmable 12v 24v led power supply 300W Built-in NFC module NFC app to fine-tuning output voltage & set ID adress available.
  • Brand:

    SMARTS
  • Item No.:

    SMT-24300V-DP2-2C
  • Input Voltage:

    100-277Vac
  • Output Voltage:

    12VDC/24VDC/36VDC/48VDC
  • Working Mode:

    Constant Voltage
  • Dimming mode:

    DALI 2&PUSH Dimmable
  • Size:

    302*78*25.1mm
  • Certification:

    UL
Products description

UL cUL DALI 2 push 24vdc dimmable LED strip driver waterproof IP67 led power supply 300w


DALI 2 PUSH dimmable 24vdc led driver 300W Built with high-quality components accurate & stable dimming available comply with global lighting safety regulation.


  Specification  

Model SMT-12300V-DP2-2C SMT-24300V-DP2-2C SMT-36300V-DP2-2C SMT-48300V-DP2-2C
Output DC Voltage 12V(12-13V adjust by NFC) 24V (24-25.5V adjust by NFC) 36V (36-38V adjust by NFC) 48V (48-50V adjust by NFC)
Voltage Tolerance ±0.2V
Rated current 25A 12.5A 8.34A 6.25A
Rated power 300W
Load Regulation 2% 1% 1% 1%
Input Voltage Range 110-277VAC 
Frequency Range 47 - 63Hz
Power Factor(Typ.)@ full load PF≥0.98@120VAC  PF≥0.95@230VAC  PF≥0.90@277VAC (Full loading)
THD(Typ.)@ full load ≤10%@120VAC ;  ≤10%@230VAC;  ≤15%@277VAC
Efficiency(Typ.)@ full load 88%@120VAC   90%@230VAC /277VAC 89%@120VAC    91%@230VAC /277VAC 89%@120VAC    91%@230VAC /277VAC 89%@120VAC    91%@230VAC /277VAC
Standby power consumption 0.24W(@120V)
0.42W(@230V)
0.48W(@277V)
0.28W(@120V)
0.41W(@230V)
0.48W(@277V)
0.28W(@120V)
0.41W(@230V)
0.48W(@277V)
0.31W(@120V)
0.43W(@230V)
0.49W(@277V)
Inrush Current (Typ.) 38.8A, 50%, 490us @120VAC; 132A, 50% , 31.2us @230VAC;  68A, 50% , 171us @277VAC
Leakage current <0.5mA 
Protection Short Circuit Hiccup mode, recover automatically after fault condition is removed
Over Load ≤120% ,hiccup mode, recover automatically after fault condition is removed 
Over temperature Ambient temp. over 55℃±10℃, output will be off; recovers automatically after temp. drops.
Environment Working TEMP. -40 ~ +70℃ (see below derating curve)
Working Humidity 20 ~ 95%RH,non-condensing 
Storage TEM.,Humidity -40 ~ +80℃,10 ~ 95%RH
TEMP.coefficient ±0.03%/℃(0 ~ 50℃)
Vibration 10 ~ 500Hz, 2G 10min./1 cycle,period for 60min. each along X,Y,Z axes 
Safety&EMC Safety standards EN 61347-1 EN 61347-2-13(EU) & UL 8750(US) 
Withstand voltage I/P-O/P:3.75KVAC   I/P-FG:1.5KVAC  O/P-FG:0.5KVAC (EU)I/P-O/P:1.80KVAC   I/P-FG:1.5KVAC  O/P-FG:0.5KVAC (US)
Isolation resistance I/P-O/P:100MΩ/ 500VDC/ 25℃/ 70%RH  
EMC Emission EN55015  EN61000-3-2 EN61000-3-3 (EU)≥50% Load & FCC Part 15 B (US)
EMC Immunity EN61000-4-2,3,4,5,6,11  EN61547
Others Weight 0.95KG
Dimension 302*78*25.1mm (L*W*H)  
packing 390x325x185mm     20PCS/CTN    G.W.:21.0KG/CTN
Notes 1. All parameters NOT specially mentioned are measured at 230VAC input , rated load and 25℃of ambient temperature.
2. Tolerance: includes set up tolerance, line regulation and load regulation .
Click Send Email for Details
Click skpye 24 hours Online Reply
Scan to start our communication
Back to top

led driver 24v 300w

  Mechanical Specification  



Input & Output wiring

※Input Rubber cable 3*1.0mm², the green/yellow cable connect with (FG) ,Brown with AC (L),Blue with AC(N) (EU);

Input SJOW Rubber cable 3*18AWG, the green cable connect with (FG) ,Black with AC (L), White with AC(N) (US);

※Output electronic cable 6*14AWG (every color has two cables), to be connected to LED Light (12V output voltage);  

  Output electronic cable 3*14AWG, to be connected to LED Light (24~48V output voltage)

Dimming cable   

Dimming electronic cable 3*18AWGBrown DA/N and Purple DA/L (No polar) connected to the DALI BUS when use DALI function.

Brown (N) is connected to AC (N) while Purple (L) and Gray (CCT Push )connected to CCT Push dim switch dimmer( L) when use Push function.

※Please make sure you connect these correctly otherwise your product will not function correctly and could be damaged.

 

CCT (TW) dimming: electronic cable, Black is output ( V+) Positive, While (CW-) and Yellow (WW-) are output (V-) negative 

Note:  there is external antenna at output side.  Don't disassemble!


 Dimming Operation 

Note: For DALI Dimming Wiring Diagram 3, please noted that only one DALI power is need in the DALI bus, so no extra DALI power is needed if the Master or Dimmer already includes the DALI Power.


led driver 24v 300w


  Related Products  

24vdc dimmable led driver

277Vac Triac dimmable constant voltage led power supply 300w built to last, providing reliable and consistent dimming performance over time.


Model:SMT-012-300VTHW

Input Voltage: 100-277VAC

Dimming Mode: Triac Dimmable
Size:
276*78*47mm (L*W*H)
Certification:UL


Leave a message
To know more our LED drivers/power supplies/LED transformers, pl. send email to us, we will reaply you soon.
Categories
Related Product
60w led driver

dali 2 & push dimming 12V/24V/36V/48V 60w Constant voltage led driver selv ip20

Plastic case dali2 &push dimmable 60W LED driver has passed UL certification, input voltage is 100-277vac, built-in active PFC function, working mode is constant voltage mode, working efficiency can reach 88.5%
100watt led driver

100w 12 volt dali 2 & push dimmable waterproof led power supply light transformer driver price

Waterproof 100W LED driver built-in active PFC function, constant pressure working mode, efficiency up to 89%, aluminum shell, size 231*78*25.1mm, dimming mode dali2 & push dimmable
dali dimmable driver

150W 12v constant voltage waterproof dali 2& push led strip lighting drivers power supply

Smarts new 150W dali2 dimming led driver has a dimming range of 0-100%, enabling flicker-free dimming with PWM output frequency
12v 200w led driver

dali 2 & push dimming waterproof led constant voltage power supply 12v 200w ip67

200W waterproof led driver Input voltage in 100-277vac, constant voltage mode, built-in PFC function, short circuit, overload, overvoltage protection, 7-year safety guarantee
12v power supply 300w

300w 24v dali 2 dimming waterproof constant voltage led power supply light driver ip67

Waterproof 300W DALI 2& PUSH Dimming led power supply, aluminum case, waterproof class ip67, input voltage is 100-277vac, in accordance with the North American safety lighting rules, and in accordance with the dali dimming protocol IEC62386, It is mainly used in large intelligent lighting projects in North America
dali led driver

ip67 waterproof 96W 277vac to 24vdc dali 2&push dimmable constant voltage led power supply driver

DALI 2&PUSH Dimmable constant voltage 96W LED driver DT8 standard The dimming range is 0-100%, can achieve flicker-free dimming, output frequency is PWM, suitable for intelligent lighting dimming projects

SMARTS

Connect With Us
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Way to contact us.
Copyright © Swin Technology Co., Ltd..All Rights Reserved. dyyseo.com / Sitemap / XML
Welcome to SMARTS
To know more our LED drivers/power supplies/LED transformers, pl. send email to us, we will reaply you soon.

Home

Products

About

Contact