100-277VAC constant voltage dimmable junction box led strip light driver 12v 100w
This 100W TRIAC dimmable led power supply has a constant voltage operation mode and is designed with a fully protected aluminum housing. It has two modes, PWM and voltage reduction, to switch between. The dimming range is smooth and flicker-free between 0-100%. It complies with global safety lighting regulations.
Specification
| Model | SMT-12100-VT-J | SMT-24096-VT-J | SMT-36096-VT-J | SMT-48096-VT-J | |
| Certificate | UL/cUL / FCC(Pending) / CE / ROHS / Reach | ||||
| Output | DC Voltage | 12V | 24V | 36V | 48V |
| (12-13.5V adjust by NFC) | (24-26V adjust by NFC) | (36-38V adjust by NFC) | (48-50Vadjust by NFC) | ||
| Voltage Tolerance | ±0.5V | ||||
| Voltage Regulation | ±0.5% | ||||
| Rated current | 8.0A | 4.00A | 2.66A | 2.0A | |
| Rated power | 100W | ||||
| Load Regulation | ≤3% | ||||
| Dimming Mode | PWM & VR two modes for choice ON for PWM mode while 1 for VR mode | ||||
| Power off till three seconds, then power-on for mode switch | |||||
| Input | Voltage Range | 110-277VAC | |||
| Frequency Range | 47 - 63Hz | ||||
| Power Factor @ full load | ≥0.95 | ||||
| Efficiency @ full load |
≥89%@120VAC ≥90%@277VAC |
≥88%@120VAC ≥91.5%@277VAC |
≥86%@120VAC ≥89.5%@277VAC |
≥87%@120VAC ≥90.5%@277VAC |
|
| AC Current (Max.) | 1.1A | ||||
| THD(Typ.)@full load | ≤20%@120VAC~277VAC full load | ||||
| Standby power(max.) | ≤0.5W | ||||
| Inrush Current (Typ.) | 51A, 208us@50%Ipeak @120VAC 118A, 452us@50%Ipeak @277VAC | ||||
| Leakage current | ≤0.5mA | ||||
| Protection | Short Circuit | Hiccup mode, automatically recovers after an exception is removed | |||
| Over Load | ≤120%,hiccup mode, automatically recovers after an exception is removed | ||||
| Over Temperature | Shell surface temperature 100℃±10℃shut down o/p voltage, automatically recover after the temperature drops. | ||||
| Environment | Working TEMP | -40~+60℃ (see below derating curve) | |||
| Working Humidity | 20 -95%RH non-condensing | ||||
| Storage TEM.,Humidity | -40 - +80℃,10 - 95% RH non-condensing | ||||
| TEMP.coefficient | ±0.03%/℃(0 - 50℃) | ||||
| Vibration | 10~500Hz, 5G 12min./1 cycle, period for 72min. each along X,Y,Z axes | ||||
| Safety & EMC | Safety standards | UL8750 (US) | |||
| Withstand voltage | I/P-O/P:1.88KVAC I/P-FG:1.88KVAC O/P-FG:1.88KVAC (US) | ||||
| Isolation resistance | I/P-O/P:100MΩ / 500VDC / 25℃ / 70% RH | ||||
| EMC Emission | FCC Part 15, Subpart B (US) | ||||
| lightning surge | L to L: 2KV L to G: 4KV | ||||
| Stroboscopic | Strobe test standard | IEEE 1789 | |||
| Others | Net Weight | 1.1Kg | |||
| Dimension | 188*95.4*42.7mm (L*W*H) | ||||
| Packing | |||||
| Notes | 1. All parameters NOT specially mentioned are measured at 120VAC input,rated load and 25℃ of ambient temperature. | ||||
| 1. Under low input voltage, derating output is required to ensure a long life. | |||||
|
|
 |
 |
 |
Mechanical Specification
1.Input 1015 0.824mm2 3*18AWG: Black cable (L), White cable (N), Green cable (G).
2.Output 1015 0.824mm2 2*18AWG: Red cable(V+) connect to positive(+), Black cable(V-) connect to negative(-).
3.Please make sure your connect these correctly otherwise your product will not function correctly and could be damaged.
Dimming Operation
TRIAC/Phase cut dimming
1. The Pulse-Width Modulation (PWM) of output voltage can be adjusted through input terminal of the AC phase line(L) by connection
2. phase /Triac dimmer or lighting system.
3. Working with forward phase, MLV and Reverse phase , ELV, TRIAC dimmers.
4. Min. loading is about 10%.
5. Please try to use dimmers with power at least 1.5 times as the output power of the driver.
Related Products
|
Ultra-thin size 100W triac dimmable led driver constant voltage working mode, aluminum housing design waterproof level ip67. Comply with global safety lighting regulations. Mainly sold to North America. With 7 years warranty
Model: SMT-012-100VTSW Input Voltage: 100-277vac
Dimming Mode: triac dimmable
|
