12 volt 24 volt 300w phase cut dimming led drivers
Smarts phase dimming constant voltage led driver are compatible are compatible with both forward phase (leading edge, triac, incandescent) and reverse phase (electronic lowvoltage, ELV, and trailing edge) dimmers. And all of they had the protection like overload, over temprature and over current protection, that would be safety when anything happened. Higher security level than meanwell's ordinary LED power supply 300W
Specification
Model
SMT-012-300VTH (1.0 version)
SMT-012-300VTHV2 (2.0 version)
SMT-012-300VTHWV2 (3.0 version)
SMT-024-300VTH (1.0 version)
SMT-024-300VTHV2 (2.0 version)
SMT-024-300VTHWV2 (3.0 version)
Output
DC Voltage
12V
24V
Voltage Tolerance
±0.5V
Voltage Regulation
±0.5%
Voltage Tolerance
±0.5V
Load Regulation
±2%
±1%
±1%
Rated current
25.0A
12.5A
Rated power
300W
Input
Voltage Range
100-277VAC
Frequency Range
47~63HZ
Power Factor(Typ.)@ full load
0.98@120VAC0.97@277VAC
0.98@120VAC 0.97@277VAC
THD(Typ.)@ full load
<20%
Inrush Current (Typ.)
20A, 50%, 1.4ms
Full Load
Efficiency(Typ.)
>88%
>88%
AC Current(Typ.)
3.4A@110VAC 1.76A
Leakage current
<0.50mA
Protection
Short Circuit
shut down o/p voltage, re-power on to recover after fault condition is removed
Over load
≤120% constant current limiting, auto-recovery
Over temperature
100℃±10℃ shut down o/p voltage, automatically recover after cooling.
Over Current
≤1.4*I out
Environment
Working TEMP.
-40~+60℃
Working Humidity
20~90%RH,non-condensing
Storage TEM.,Humidity
-40~+80℃,10~95%RH
TEMP.coefficient
±0.03%/℃(0~50℃)
Vibration
10~500Hz 2G 10min./1 cycle,period for 60min.each along X,Y,Z axes
Safety&EMC
Safety standards
UL8750
Withstand voltage
I/P-O/P: 3.50KVAC
Isolation resistance
I/P-O/P:100MΩ/500VDC/25℃/70%RH
EMC EMISSION
Compliance to EN55015,EN61000-3-2 (≥50%load) / FCC Part 15 B
EMC IMMUNITY
EN61000-4-2,3,4,5,6,11(Surge 4KV)
Others
Weight
About 1.9Kg
Size
1.0 version:278*108*46mm (L*W*H) ; 2.0 version: 278*110*45mm (L*W*H); 3.0 version: 278*130*45mm (L*W*H)
packaging
10PCS/CTN 385*335*200mm 20PCS/CTN
Notes
1. All parameters NOT specially mentioned are measured at 110V & 277VAC input , rated
load and 25℃of ambient temperature.
2..Tolerance:includes set us tolerance,line regulation and load regulation.
Mechanical Specification
Input terminals "Black" and "White" to connect to AC L and N.
Output terminals "Red" to LED Positive side (+) , "Black" to LED Negative side (-).
Compatible LED strip lights Type
SMARTS's 12 volt 24 volt led drivers have been compatible well with a large selection of LED strip lights for indoor or outdoor LED project, such as under-cabinet lighting, landscapes, residential and more. Choose 24V or 12V LED tape lights of any brightness or length for the led strip with the our led driver.
Related Products
|
12v 60w dimmable led driver are 7 years warranty and compatible with Leading edge or trailing edge triac dimmers, but trailing edge dimmers work better. Please try to use dimmers with power at least 1.5 times as the output power of the driver. Mode:SMT-012-060VTHV2 intput voltage:100~277V AC Efficiency > 88% Size:188*94.5*40mm (L*W*H) Weight:0.45Kg/pcs |
|