12V 24V LED Driver Dimmable 250W 300W 100W 120W Manufacturers
Our replacement led drivers is 12v 24v from 30watts to 384watts available with isolated circuits and overload protection. 277vac dimmable led power supply is designed to work with any recent standard wall dimmer (Triac or Low voltage Magnetic) and allows you to smoothly dim your LED Strips from 100% to 20% without any noise or flickering.
Specifications
|
Model |
SMT-012-300VTHW2J |
SMT-024-288VTHW2J |
||
|
Output |
DC Voltage |
12V |
24V |
|
|
Voltage Tolerance |
±0.5V |
|||
|
Voltage Regulation |
±0.5% |
|||
|
Voltage Tolerance |
±0.5V |
|||
|
Load Regulation |
±1% |
±1% |
||
|
Rated current |
12.0A (3*4A) |
25.0A (5*5A) |
||
|
Rated power |
288W (3*96W) |
300W (5*60W) |
||
|
Input |
Voltage Range |
100-277VAC |
||
|
Frequency Range |
47～63HZ |
|||
|
Power Factor（Typ.）@ full load |
0.99@120VAC 0.95@277VAC |
0.99@120VAC 0.95@277VAC |
||
|
THD（Typ.）@ full load |
<20% |
|||
|
Inrush Current （Typ.） |
35A ,50%,960us @120VAC ; 43A,50%,1ms @277VAC |
|||
|
Full Load Efficiency（Typ.） |
>88% |
>88% |
||
|
AC Current（Typ.） |
3.4A@100VAC |
3.6A@100VAC |
||
|
Leakage current |
<0.50mA |
|||
|
Protection |
Short Circuit |
shut down o/p voltage, re-power on to recover after fault condition is removed |
||
|
Over load |
≤120% constant current limiting, auto-recovery |
|||
|
Over temperature |
100℃±10℃ shut down o/p voltage, automatically recover after cooling. |
|||
|
Environment |
Working TEMP. |
-40～+60℃ |
||
|
Working Humidity |
20～90%RH,non-condensing |
|||
|
Storage TEM.,Humidity |
-40～+80℃，10～95%RH |
|||
|
TEMP.coefficient |
±0.03%/℃（0～50℃） |
|||
|
Vibration |
10～500Hz 2G 10min./1 cycle，period for 60min.each along X, Y,Z axes |
|||
|
Safety&EMC |
Safety standards |
UL8750+UL1310 |
||
|
Withstand voltage |
I/P-O/P:1.88KVAC |
|||
|
Isolation resistance |
I/P-O/P:100MΩ/500VDC/25℃/70%RH |
|||
|
EMC EMISSION |
FCC 47 CFR Part 15 ,Subpart B |
|||
|
EMC IMMUNITY |
EN61000-4-2,3,4,5,6,11（Surge 4KV） |
|||
|
Others |
Weight |
1.90Kg |
||
|
Size |
303*78*47mm (L*W*H) |
|||
|
packaging |
10PCS/CTN 385*335*200mm 20PCS/CTN |
|||
|
Notes |
1. All parameters NOT specially mentioned are measured at 110V & 277VAC input , rated load and 25℃of ambient temperature. 2..Tolerance:includes set us tolerance,line regulation and load regulation. |
|||
 |
 |
 |
 |
Mechanical Specification
Ø Input wire 18AWG Black and White to be connected to AC L and N ,Green wire go ground,
Ø Output cable 2*16AWG,Red" (+) to LED Positive side (+) , "Black"(-) to LED Negative side (-).
Note: five groups of SMT-012-300VTHW2
Ø Please make sure your connect these correctly otherwise your product will not function correctly and could be damaged.
Note: Output wire : Tolerance:P 0.5-2mm
Dimming Operation
※Output PWM of output voltage can be adjusted through input terminal of the AC phase line(L) by connection a triac dimmer.
※Compatible with Leading edge or Reverse phase, trailing edge triac dimmers, Magnetic low voltage dimmers, Electric low voltage Dimmers..
※Please try to use dimmers with power at least 1.5 times as the output power of the driver.
Compatible Lighting Type
The Spotless strip also has a high colour rendering index of CRI 90 and is very bright at 1420 lm/M, which means the strip can be used to create custom luminaires. Spotless Strip 24V IP20 5m x 10mm 2700K 18W/m CRI90 from ntegral-led can be matched with led driver 24v 100w from Swinpower.
 |
|
Related Products
|
|
New Multi-Dim led driver dimmable 250w 300w Class 2 constant voltage 12VDC LED Driver features outstanding LED dimming performance. 300W (5 x 60W) 12VDC Class 2 Dimmable LED Driver uses Pulse-Width Modulation (PWM) dimming for smooth dimming.
Mode：SMT-012-300VTHJV2 intput voltage：100~277V AC Efficiency > 82% Size：301*110*45mm（L*W*H） Weight：2.4Kg/pcs |
|
|
|
