12vdc 18w CE SAA listed small led driver for led cabinet lights
The smaller led driver could be used with the cabinet lights for Access Lighting
Specification
SPECIFICAION | |||||
MODEL | SMT-012-018VS | ||||
OUTPUT | DC VOLTAGE | 12V | |||
RATED CURRENT | 1.5A | ||||
CURRENT RANGE | 0-1.5A | ||||
RATED POWER | 18W | ||||
RIPPLE&NOISE(max) | <150mV | ||||
VOLTAGE TOLERANCE | ±0.5V | ||||
INPUT | VOLTAGE RANGE | 100-265VAC | |||
FREQUENCY RANGE | 47-63Hz | ||||
POWER FACTOR(Typ.) | no PFC | ||||
EFFICIENCY(Typ.) | >84% | ||||
AC CURRENT(Typ.) | 0.18A/220VAC | ||||
PROTECTION | Short circuit | Protection type:Hiccpe mode,recovers automatically after condition is removed | |||
Overload | 2A | ||||
ENVIRONMENT | WORKING TEMP. | -10~+40℃ (Refer to output load derating curve) | |||
STORAGE TEMP | -40~+80℃ | ||||
SAFETY&EMC | SAFETY STANDARDS | EN61347-1;EN61347-2-13;SELV;SAA approved | |||
WITHSTAND VOLTAGE | I/P-O/P:3.75KVAC | ||||
NOTE |
1.All parameters NOT specially mentioned are measured at 220VAC input,rated load and 25℃ of ambient temperature. 2.Ripple&noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf&47uf parallel capacitor. 3.Tolerance:includes set up tolerance,line regulation and load regulation. |
||||
Mechanical Specification
① AC socket:DB-8
② Sensor switch socket:5557-3.0-2*2AW
③ DC socket:TCJ8H 6PCS
Cable Model of input : 2 pins plug power cord (VDE 18AWG wires)
output cord suggestion: H03VV-F 2*0.75mm2(red, black)
Compatible LED cabinet Type
When you need 12 volt led small driver for the led cabinet lights, we will suggest our 12vdc 18w with multiple listee outputs for your LED lighting.
Related Products
|
Smarts dimmable led driver could be used with both leading edge and trailing edge triac dimmers. And most of Lutron brands could work well with our dimmable led driver in the led display superior lighting.
Mode:SMT-012-030VTHW intput voltage:100~277V AC Efficiency > 88% Size:155*54*20mm (L*W*H) Weight:0.21Kg/pcs |
|