277vac class 2 power supply 12vdc 24volt 300w outdoor led strip light transformer
Comply with UL/cUL, FCC, Type HL, Class 2 rate, this newly released non dimmable class 2 led light power supply features high compatablity to Dellum strip lighting BLL-FP10AFHDJ-120A.
Specification
Model
SMT-012-300VWJ2 (1.0 version)
SMT-012-300VWJ2V2 (2.0 version)
SMT-012-300VWJ2WV2 (3.0 version)
SMT-024-288VWJ2 (1.0 version)
SMT-024-288VWJ2V2 (2.0 version)
SMT-024-288VWJ2WV2 (3.0 version)
Output
DC Voltage
12V
24V
Voltage Tolerance
±0.5V
Voltage Regulation
±0.5%
Load Regulation
±1%
±1%
±1%
Rated current
25A (multi current 5*5A)
12A(multi current 3*4A)
Rated power
300W (5*60W)
288W (3*96W)
Input
Voltage Range
100-277VAC
Frequency Range
47-63Hz
Power Factor (Typ.)@full load
0.99@120VAC 0.95@277VAC
0.99@120VAC 0.95@277VAC
THD(Typ.)@full load
<20%
<20%
Inrush Current(Typ.)
88%@120V 92%@277VAC
79%
86%@120V 91%@277VAC
Efficiency(Typ.)@Full Load
3.4A@100VAC
3.6A@100VAC
AC Current（Typ.）
35A ,50%,960us @120VAC ; 43A,50%,1ms @277VAC
12.4A (twidth=430us) @277VAC
Leakage current
<0.50mA
Protection
Short Circuit
shut down o/p voltage, re-power on to recover after fault condition is removed
Over Loading
≤120% Hiccup mode ,recovers automatically after fault condition is removed
Over temperature
100℃±10℃ shut down o/p voltage, automatically recover after cooling.
Environment
Working TEMP.
-40～+60℃ (see below derating curve)
Working Humidity
20～90%RH, non-condensing
Storage TEM.,Humidity
-40～+80℃，10～95%RH
TEMP.coefficient
±0.03%/℃（0～50℃）
Vibration
10～500Hz, 5G 10min./1 cycle,period for 60min. each along X,Y,Z axes
Safety&EMC
Safety standards
UL8750+UL1310
Withstand voltage
I/P-O/P:1.88KVAC
Isolation resistance
I/P-O/P:100MΩ/500VDC/25℃/70%RH
EMC EMISSION
FCC 47 CFR Part 15 ,Subpart B
Others
Weight
2.2Kg (1.0 version)
Size
1.0 version: 301*108*46mm / 2.0 version: 301*130*46mm
3.0 version: 301*140*45mm
packaging
330*220*245mm 8pcs /CTN G.W.:21.08KG/CTN (1.0 version)
385*335*200mm 20PCS/CTN
Notes
1. All parameters if NOT specially mentioned are measured at 120VAC input , rated load and 25℃of ambient temperature.
2. To extend the driver's using life ,please reduce the loading at lower input voltage.
 |
 |
 |
 |
Mechanical Specification
Input:18AWG Black and White to be connected to AC L and N ,Green wire go ground,
Output:14AWG Red to LED Positive side (+) , Black to LED Negative side (-).
Compatible Tape Light Type
300w multiple output class 2 led light power supply SMT-012-300VWJ2WV2 is a good choice for UL listed 3000-6000K dellum led tape light BLL-FP8AFIDJ-120ACWPWW.
Related Products
|
UL/cUL, FCC, CE, ROHS, Class P, Type HL standard class 2 led light power supply compliance to worldwide safety regulations for lightings.
Mode：SMT-012-150VWJV2 intput voltage：100~277V AC pfc > 0.98 Size：260*105*45mm （L*W*H）
UL/cUL,FCC,RoHS approval
|
