700ma constant current dimmable led driver PWM output
0-100% dimming range, flicker free, plastic case for indoor installation constant current dimmable led driver with PWM dimming output.With the dimmer of LUTRONXX CT-600PR-IV, a smooth dimming effect can be achieved.
Specification
|
Model |
SMT-045-0500CD |
SMT-40-0600CDH |
SMT-35-0700CDH |
SMT-25-0500CDH |
||
|
Output |
DC Current |
500mA |
600mA |
7000mA |
500mA |
|
|
|
Current Accuracy |
±3% |
||||
|
|
Voltage Range |
33-45V |
28-40V |
23-35V |
13-25V |
|
|
|
Rated power |
24W |
24W |
24W |
12W |
|
|
Input |
Voltage Range |
180～265VAC |
||||
|
|
Frequency Range |
47～63HZ |
||||
|
|
PF(Typ.） |
PF>0.9 |
||||
|
|
Full Load Efficiency（Typ） |
>86%(110V) >88%(220V) |
>86%(110V) >88%(220V) |
>86%(110V) >88%(220V) |
>86%(110V) >88%(220V) |
|
|
|
AC Current (Typ.） |
0.104A(110V) 0.106A(220V) |
0.102A(110V) 0.103A(220V) |
0.102A(110V) 0.103A(220V) |
0.101A(110V) 0.103A(220V) |
|
|
|
Leakage current |
<0.72mA/110VAC / ﹤0.75mA/220VAC |
||||
|
Protection |
Short Circuit |
Protection type: Hiccup mode, recovers automatically after fault condition is removed |
||||
|
|
Over Current |
≦1.4*Iout |
||||
|
|
Over temperature |
100℃±10℃ shut down o/p voltage, re-power on to recover |
||||
|
Environment |
Working TEMP. |
-40～+50℃ |
||||
|
|
Working Humidity |
20～95%RH,non-condensing |
||||
|
|
Storage TEM.,Humidity |
-40～+80℃，10～95%RH |
||||
|
|
TEMP.coefficient |
±0.03%/℃（0～50℃） |
||||
|
|
Vibration |
10～500Hz，5G 12min./1 cycle，period for 72min.each along X,Y,Z axes |
||||
|
Safety&EMC |
Safety standards |
EN61347-1 EN61347-2-13. IP20 |
||||
|
|
Withstand voltage |
I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC |
||||
|
|
Isolation resistance |
I/P-O/P I/P-FG O/P-FG：100MΩ/500VDC/25℃/70%RH |
||||
|
|
EMC EMISSION |
Compliance to EN55015,EN61000-3-2 (≧50%Load) |
||||
|
|
EMC IMMUNITY |
Compliance to EN61000-4-2,3,4,5,6,8,11,EN61547,A light industry level |
||||
| Label |
 |
|||||
 |
 |
 |
 |
Features
·Output constant current wotking mode
·Range 180-265VAC
·Built-in PFC function, PF>0.9
·Efficiency 86%
·Cooling by free air convection
·IP20 design for indoor installation .
·Dimming function:0-10V/ 1-10V/ 10V PWM or potentiometer.
·Dimming range:0-100%
What is 0-10v dimming?
0-10 V is one of the simplest and earliest electronic control signaling systems, the control signal is a DC voltage that varies between 0 and 10 volts. The controlled lighting should scale its output so that at 10 V, the controlled light should be at 100% of its output, and at 0 V it should at the lowest possible output.
·
