0-10v led dimming led driver 500ma dimmable ac dc power supply
IP20 rate, plastic case, small size and light weight, increase light efficiency and decrease light attenuation., meet to safety standard and EMC requirement.Easier to install and save than moso led driver
Specification
Model |
SMT-045-0500CD |
SMT-20-0600CDH |
SMT-28-0450CDH |
SMT-25-0500CDH |
||
Output |
DC Current |
500mA |
600mA |
450mA |
500mA |
|
|
Current Accuracy |
±3% |
||||
|
Voltage Range |
33-45V |
12-20V |
16-28V |
13-25V |
|
|
Rated power |
24W |
12W |
12W |
12W |
|
Input |
Voltage Range |
180~265VAC |
||||
|
Frequency Range |
47~63HZ |
||||
|
PF(Typ.) |
PF>0.9 |
||||
|
Full Load Efficiency(Typ) |
>86%(110V) >88%(220V) |
>86%(110V) >88%(220V) |
>86%(110V) >88%(220V) |
>86%(110V) >88%(220V) |
|
|
AC Current (Typ.) |
0.104A(110V) 0.106A(220V) |
0.102A(110V) 0.103A(220V) |
0.102A(110V) 0.103A(220V) |
0.101A(110V) 0.103A(220V) |
|
|
Leakage current |
<0.72mA/110VAC / ﹤0.75mA/220VAC |
||||
Protection |
Short Circuit |
Protection type: Hiccup mode, recovers automatically after fault condition is removed |
||||
|
Over Current |
≦1.4*Iout |
||||
|
Over temperature |
100℃±10℃ shut down o/p voltage, re-power on to recover |
||||
Environment |
Working TEMP. |
-40~+50℃ |
||||
|
Working Humidity |
20~95%RH,non-condensing |
||||
|
Storage TEM.,Humidity |
-40~+80℃,10~95%RH |
||||
|
TEMP.coefficient |
±0.03%/℃(0~50℃) |
||||
|
Vibration |
10~500Hz,5G 12min./1 cycle,period for 72min.each along X,Y,Z axes |
||||
Safety&EMC |
Safety standards |
EN61347-1 EN61347-2-13. IP20 |
||||
|
Withstand voltage |
I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC |
||||
|
Isolation resistance |
I/P-O/P I/P-FG O/P-FG:100MΩ/500VDC/25℃/70%RH |
||||
|
EMC EMISSION |
Compliance to EN55015,EN61000-3-2 (≧50%Load) |
||||
|
EMC IMMUNITY |
Compliance to EN61000-4-2,3,4,5,6,8,11,EN61547,A light industry level |
||||
Label |
|
Features
- Efficiency: 88%
- RippleI & Noise (max.) : 150mVp-p
- Voltage Tolerance : ±5%
- Line Regulation : ±1%
- Load Regulation : ±2%
- Produt cord:connecting terminal(IP20) / 18AWG*20CM
- CE, ROHS approval
- 3 years warranty (We promise to replace new ones to you if there is any defective happen during the warranty period)
What is 0-10v dimming?
0-10 V is one of the simplest and earliest electronic control signaling systems, the control signal is a DC voltage that varies between 0 and 10 volts. The controlled lighting should scale its output so that at 10 V, the controlled light should be at 100% of its output, and at 0 V it should at the lowest possible output.
·