24w 600ma constant current dimmable led driver for led bulb
IP20 rate, plastic case for indoor installation, specially suitable for crompton LED lighting and LED bulbs with PWM output dimming.
Specification
|
Model |
SMT-045-0500CD |
SMT-40-0600CDH |
SMT-28-0450CDH |
SMT-25-0500CDH |
||
|
Output |
DC Current |
500mA |
600mA |
450mA |
500mA |
|
|
|
Current Accuracy |
±3% |
||||
|
|
Voltage Range |
33-45V |
28-40V |
16-28V |
13-25V |
|
|
|
Rated power |
24W |
24W |
12W |
12W |
|
|
Input |
Voltage Range |
180～265VAC |
||||
|
|
Frequency Range |
47～63HZ |
||||
|
|
PF(Typ.） |
PF>0.9 |
||||
|
|
Full Load Efficiency（Typ） |
>86%(110V) >88%(220V) |
>86%(110V) >88%(220V) |
>86%(110V) >88%(220V) |
>86%(110V) >88%(220V) |
|
|
|
AC Current (Typ.） |
0.104A(110V) 0.106A(220V) |
0.102A(110V) 0.103A(220V) |
0.102A(110V) 0.103A(220V) |
0.101A(110V) 0.103A(220V) |
|
|
|
Leakage current |
<0.72mA/110VAC / ﹤0.75mA/220VAC |
||||
|
Protection |
Short Circuit |
Protection type: Hiccup mode, recovers automatically after fault condition is removed |
||||
|
|
Over Current |
≦1.4*Iout |
||||
|
|
Over temperature |
100℃±10℃ shut down o/p voltage, re-power on to recover |
||||
|
Environment |
Working TEMP. |
-40～+50℃ |
||||
|
|
Working Humidity |
20～95%RH,non-condensing |
||||
|
|
Storage TEM.,Humidity |
-40～+80℃，10～95%RH |
||||
|
|
TEMP.coefficient |
±0.03%/℃（0～50℃） |
||||
|
|
Vibration |
10～500Hz，5G 12min./1 cycle，period for 72min.each along X,Y,Z axes |
||||
|
Safety&EMC |
Safety standards |
EN61347-1 EN61347-2-13. IP20 |
||||
|
|
Withstand voltage |
I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC |
||||
|
|
Isolation resistance |
I/P-O/P I/P-FG O/P-FG：100MΩ/500VDC/25℃/70%RH |
||||
|
|
EMC EMISSION |
Compliance to EN55015,EN61000-3-2 (≧50%Load) |
||||
|
|
EMC IMMUNITY |
Compliance to EN61000-4-2,3,4,5,6,8,11,EN61547,A light industry level |
||||
| Label |
 |
|||||
 |
 |
 |
 |
Features
·Output constant current
·Range 180-265VAC
·Built-in PFC function, PF>0.9
·Efficiency 86%
·Protections:short circuit/over current/over voltage
·Cooling by free air convection
·IP20 design for indoor installation .
·Dimming function:0-10V/ 1-10V/ 10V PWM or potentiometer.
·Dimming range:0-100%
What is 0-10v dimming?
0-10 V is one of the simplest and earliest electronic control signaling systems, the control signal is a DC voltage that varies between 0 and 10 volts. The controlled lighting should scale its output so that at 10 V, the controlled light should be at 100% of its output, and at 0 V it should at the lowest possible output.
