CE SAA listed slim type 24VDC 30w led driver ip20
The led power supply 30w is quite usuful to be used with the led sign of LED lighting concept lighting, they are 7 years warranty and compact size for the damp and wet location.
Specification
|
model |
SMT-012-030VTDSPH |
SMT-024-030VTDSPH |
|
|
Output |
DC Voltage |
12VDC |
24VDC |
|
Voltage Tolerance |
±0.5 |
||
|
Rated current |
2.5Amp |
1.25Amp |
|
|
Rated power |
30W |
30W |
|
|
Voltage Regulation |
±0.5% |
||
|
Load Regulation |
±2% ±1% |
||
|
Input |
Voltage Range |
200-240VAC |
|
|
Frequency Range |
47～63HZ |
||
|
Power Factor ( Typ.） |
PF≥0.96/230VAC |
||
|
THD(Typ. ) @ full load |
< 20% |
||
|
Full Load Efficiency（Typ.） |
79% |
78% |
|
|
AC Current（Typ.） |
0.25A |
||
|
Inrush Current（Typ.） |
40.8A,50%,102us |
||
|
Leakage current |
<0.5mA |
||
|
Protection |
Short Circuit |
Hiccup mode,recovers automatically after fault condition is removed |
|
|
Over Loading |
≤120% Hiccup mode,recovers automatically after fault condition is removed |
||
|
Over temperature |
100℃±10℃ |
||
|
Protection Class |
II |
||
|
Environment |
Working TEMP. |
-40~+60℃ (see below derating curve) |
|
|
Working Humidity |
20 - 95%RH,non-condensing |
||
|
Storage TEM.,Humidity |
-40 - +80℃,10 - 95%RH |
||
|
TEMP.coefficient |
±0.03%/℃(0 - 50℃) |
||
|
Vibration |
10～500Hz, 2G 10min./1 cycle,period for 60min. each along X,Y,Z axes |
||
|
Safety&EMC |
Safety standards |
EN61347-1 EN61347-2-13 EN62493 |
|
|
Withstand voltage |
I/P-O/P:3.75KVAC |
||
|
Isolation resistance |
I/P-O/P: 100MΩ/500VDC/25℃/70%RH |
||
|
EMC EMISSION |
EN55015 EN61000-3-2 EN61000-3-3 |
||
|
EMC IMMUNITY |
EN61000-4-2,3,4,5,6,11 EN61547 |
||
|
Others |
Weight |
0.2Kg |
|
|
Size |
260*30*18.5mm(L*W*H) |
||
|
packing |
330*275*130mm/ 50pcs /CTN G.W.: 11KG/CTN |
||
|
Notes |
1. All parameters NOT specially mentioned are measured at 230VAC input , rated load and 25℃of ambient temperature. 2. Tolerance: includes set up tolerance, line regulation and load regulation . 3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again. |
||
 |
 |
 |
 |
Mechanical Specification
Input terminals: (L) and (N) to connect to L and N of Mains AC
Output terminals: LED (+) to LED Positive side (+) , LED (-) to LED Negative side (-).
Dimming Terminal: DIM (+) to 0/1-10V dimmer signal(+ ),DIM (-) to 0/1-10V dimmer signal(-)
Please DO NOT connect “DIM-“ to “LED-“, “DIM+” to “ LED+” ,or other incorrect connection.
Please make sure your connect these correctly otherwise your product will not function correctly and could be damaged.
Conection diagram
Compatible with LED ceiling Type
The dimmable and non dimmable led driver with UL listed is always to be paired with the ceiling light, kitchen light and restaurant light.
Related Products
|
The non dimmable led driver 30w is small size and compact size with plastic case, 100-277vac with high PF>0.90. We believed that they are the best slolution for the led lighting you have never seen!
Mode：SMT-012-030VWN intput voltage：100~277V AC Efficiency > 88% Size：155*54*20mm （L*W*H） Weight：0.23 Kg/pcs |
|
|
