dali dimmable constant current LED driver 500ma 15watt
Smarts SMT-030-0500CM is constant current LED driver 500ma which could drive your 15-30vdc 15watt dali dimmable LED lighting project.
|
Feture |
|
|
·Output constant current
·Range 100-265VAC ·Built-in PFC function, PF> 0.9 ·Efficiency 86% ·Protections:short circuit/over current/over temperature ·Cooling by free air convection ·Dimming function:DALI dimmable ·Suitable for LED lighting applications by PWM output ·Compliance to worldwide safety regulations for lighting ·Suitable for dry/damp/wet locations ·5 years warranty |
|
Specification
|
Model |
SMT-050-0300CM |
SMT-050-0350CM |
SMT-030-0500CM |
SMT-025-0700CM |
SMT-020-0900CM |
|
|
Output |
DC Voltage |
30-50V |
35-50V |
15-30V |
10-25V |
10-20V |
|
Voltage Accuracy |
±0.3V |
|||||
|
Rated current |
0~300MA |
0~350MA |
0~500MA |
0~700MA |
0~900MA |
|
|
Rated power |
15.0W |
17.5W |
15W |
17.5W |
18W |
|
|
Input |
Voltage Range |
100-265VAC |
||||
|
Frequency Range |
47~63HZ |
|||||
|
Power Factor ( Typ.) |
PF≧0.9/220V |
|||||
|
Full Load Efficiency(Typ.) |
>86%(110,220V) |
>86%(110,220V) |
>85%(110,220V) |
>85%(110,220V) |
>85%(110,220V) |
|
|
AC Current(Typ.) |
0.96A(110,220V) |
0.96A(110,220V) |
1.042A(110,220V) |
1.031A(110,220V) |
1.031A(110,220V) |
|
|
Leakage current |
﹤0.35mA/220VAC |
|||||
|
Protection |
Short Circuit |
Protection type: Hiccup mode, recovers automatically after fault condition is removed |
||||
|
Over Current |
≦1.4*Iout |
|||||
|
Over temperature |
100℃±10℃ shut down o/p voltage, re-power on to recover |
|||||
|
Environment |
Working TEMP. |
-40~+50℃ |
||||
|
Working Humidity |
20~95%RH,non-condensing |
|||||
|
Storage TEM.,Humidity |
-40~+80℃,10~95%RH |
|||||
|
TEMP.coefficient |
±0.03%/℃(0~50℃) |
|||||
|
Vibration |
10~500Hz,5G 12min./1 cycle,period for 72min.each along X,Y,Z axes |
|||||
|
Safety&EMC |
Safety standards |
EN61347-1 EN61347-2-13 IP20 |
||||
|
Withstand voltage |
I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC |
|||||
|
Isolation resistance |
I/P-O/P I/P-FG O/P-FG:100MΩ/500VDC/25℃/70%RH |
|||||
|
EMC EMISSION |
Compliance toEN55015,EN61000-3-2 (≧50%load) |
|||||
|
EMC IMMUNITY |
Compliance to EN61000-4-2,3,4,5,6 ,11,EN61547,A light industry level (surge4KV) |
|||||
|
Others |
Weight |
0.15Kg |
||||
|
Size |
140*45*28mm(L*W*H) |
|||||
|
packing |
324*298*188(50PCS)CTN 145*47*35 mm for inner box |
|||||
|
Notes |
1. All parameters NOT specially mentioned are measured at 220VAC input , rated load and 25℃of ambient temperature. 2. Ripple& noise are measured at 20MHz of bandwidth by using a 12”twisted pair-wire terminated with a 0.1uf &47uf parallel capacitor. 3. Tolerance:includes set us tolerance,line regulation and load regulation . |
|||||
 |
 |
 |
 |
Our led drivers are widely used for
1.Indoor LED illuminating lights
2.LED Neon, LED urban Decoration
3.LED Lighting Advertising,LED Display
4.Safety Protection Apparatus
5.Telecommunications, Networks
6.Vehicle Lights, Controller Panels
