dali led driver triac dimmer conatant current wholesale
Features
·Suitable for dry locations
Specification
|
Model： SMT-040-0500CM |
Smarts Electronics DALI dimmable drivers 10~20W (adjustable current) |
||||||||
|
Output |
Rated current |
700mA |
600mA |
550mA |
500mA |
450mA |
400mA |
350mA |
250mA |
|
Current Tolerance |
±5% |
||||||||
|
DC Voltage |
3-28V |
3-32V |
3-36V |
3-40V |
3-45V |
3-50V |
3-50V |
3-50V |
|
|
Open Circuit Voltage (Max.) |
55V |
||||||||
|
Rated power |
20W |
20W |
20W |
20W |
20W |
20W |
17.5W |
12.5W |
|
|
Input |
Voltage Range |
100-265VAC |
|||||||
|
Frequency Range |
47～63HZ |
||||||||
|
Power Factor |
PF≥0.95/110VAC PF≥0.90/220VAC PF≥0.85/265VAC（Full loading） |
||||||||
|
Full Load Efficiency (Typ.) |
>82% |
>83% |
>82% |
>82% |
>84% |
>84% |
>82% |
>80% |
|
|
AC Current（Max.） |
0.22A |
0.22A |
0.22A |
0.22A |
0.22A |
0.22A |
0.20A |
0.15A |
|
|
Leakage current |
<0.5mA |
||||||||
|
Protection |
Short Circuit |
Protection type: Hiccup mode, recovers automatically after fault condition is removed |
|||||||
|
Over Voltage |
55V |
||||||||
|
Over Load |
≤ 120% |
||||||||
|
Protection Class: |
Class II / Class 2 |
||||||||
|
Environment |
Working TEMP. |
-40 - +60℃ |
|||||||
|
Working Humidity |
20 - 90%RH,non-condensing |
||||||||
|
Storage TEM.,Humidity |
-40 - +80℃，10 - 95%RH |
||||||||
|
TEMP.coefficient |
±0.03%/℃（0 - 50℃） |
||||||||
|
Vibration |
10 - 500Hz, 2G 12min./1 cycle, period for 72min.each along X,Y,Z axes. |
||||||||
|
Safety & EMC |
Safety standards |
EN61347-1 EN61347-2-13 IP20 |
|||||||
|
Withstand voltage |
I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC |
||||||||
|
Isolation resistance |
I/P-O/P I/P-FG O/P-FG：100MΩ/500VDC/25℃/70%RH |
||||||||
|
EMC Emission |
EN55015,EN61000-3-2 (≥60%load) |
||||||||
|
EMC Immunity |
EN61000-4-2,3,4,5,6 ,11,EN61547,A light industry level （surge4KV） |
||||||||
|
Others |
Weight |
0.19Kg |
|||||||
|
Size |
140*45*27mm（L*W*H） |
||||||||
|
packing |
320*280*215（50PCS/CTN ） |
||||||||
|
Notes |
1. All parameters NOT specially mentioned are measured at 120V/220VAC input , rated load and 25℃of ambient temperature. 2. Tolerance: includes set us tolerance, line regulation and load regulation . 3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again. |
||||||||
Mechanical Dimension
1) Input with Live Wire(L) Neutral Wire (N)
2) Output LED SEC output Positive(LED+),output negative(LED-).Connected to LED Lamps.
3) Signal Dimming DA1, DA2 ( No polar ) connected to the BUS of the DALI Master.
4) Suggested wire diameter: Input 0.75-2.5mm2; Output: 0.5-2.5mm2
5) Please make sure you connect these correctly otherwise your product will not function correctly and could be damaged.
6) Note: Any other requests we can customized.
What do you mean by constant voltage?
|
Constant voltage' refers to the ability to fluctuate output current to maintain a set voltage. Constant voltage can be used for applications where the workpieces do not have flat surfaces, e.g. crossed wires, and where the resistance varies significantly, and for extremely short welds (less than 1 millisecond). |
