led transformer dimmable 200 watt led driver triac dimming for WET location
LED dimming power supply with the aluminum metal housing allows electrical connections to be made inside the J-box, Easier to install than done 200W dimming power supply.Phase dimmable with an electronic low voltage, ELV, MLV dimmer.
Specification
Model
SMT-012-200VTH (1.0 version)
SMT-012-200VTHV2 (2.0 version)
SMT-012-200VTHWV2 (3.0 version)
SMT-024-200VTH(1.0 version)
SMT-024-200VTHV2 (2.0 version)
SMT-024-200VTHWV2 (3.0 version)
Output
DC Voltage
12V
24V
Voltage Tolerance
±0.5V
Voltage Regulation
±0.5%
Voltage Tolerance
±0.5V
Load Regulation
±2% ±1%
±1%
Rated current
16.67A
8.33A
Rated power
200W
Input
Voltage Range
100-277VAC
Frequency Range
47~63HZ
Power Factor(Typ.)@ full load
0.96@120VAC 0.97@277VAC
0.97@120VAC 0.95@277VAC
THD(Typ.)@ full load
<20%
Inrush Current (Typ.)
15A, 50%, 1.4ms
Full Load
Efficiency(Typ.)
>88%
>88%
AC Current(Typ.)
2.3A@110VAC 1.76A 1.76A .A 1.74A
Leakage current
<0.50mA
Protection
Short Circuit
shut down o/p voltage, re-power on to recover after fault condition is removed
Over load
≤120% constant current limiting, auto-recovery
Over temperature
100℃±10℃ shut down o/p voltage, automatically recover after cooling.
Over Current
≤1.4*I out
Environment
Working TEMP.
-40~+60℃
Working Humidity
20~90%RH,non-condensing
Storage TEM.,Humidity
-40~+80℃,10~95%RH
TEMP.coefficient
±0.03%/℃(0~50℃)
Vibration
10~500Hz 2G 10min./1 cycle,period for 60min.each along X,Y,Z axes
Safety&EMC
Safety standards
UL8750
Withstand voltage
I/P-O/P:3.75KVAC
Isolation resistance
I/P-O/P:100MΩ/500VDC/25℃/70%RH
EMC EMISSION
Compliance to EN55015,EN61000-3-2 (≥50%load)
EMC IMMUNITY
EN61000-4-2,3,4,5,6,11(Surge 4KV)
Others
Weight
1.8Kg
Size
1.0 version: 260*103*46mm (L*W*H);
2.0 ver.: 260*105*45mm (L*W*H);3.0 ver.: 260*125*45mm (L*W*H);
packaging
10PCS/CTN Carton size: 385*335*200mm
Notes
1. All parameters NOT specially mentioned are measured at 110V & 277VAC input , rated
load and 25℃of ambient temperature.
2..Tolerance:includes set us tolerance,line regulation and load regulation.
Mechanical Specification
Input:18AWG Black and White to be connected to AC L and N ,Green wire go ground,
Output: Red is(DIM+),Black is(DIM-)
Compatible Dimmer Type
Leading edge phase wall dimmers by Lutron brand, for use with 200w dimmable low voltage transformer, provides a smooth, slide-action and full-range dimming for LED lighting.
Related Products
led dimming power supply are made for cabinets, display lighting, accent lighting, cove lighting, with integrated UL Listed junction box supply reliable.
Mode:SMT-012-060VTHV2 intput voltage:100~277V AC Efficiency > 87% Size:188*94.5*40mm (L*W*H) 100~277V AC for any residential or commercial application |