Triac dimmable led driver 12v 1a 24w power supply for led lighting
Triac dimmable led power supply are available in 24–200 watt models. The amount of power needed for your application is dependent on the watts required by your LED lighting. The watts required for each LED lighting product can be found in their associated installation guidelines.
Feature
·Universal AC input: 100-130VAC/170-265VAC
·Power Factor > 0.70
·High efficiency > 84%
·Protection:short circuit/over loading/over current/ Over temperature
·Full protection plastic housing
·Easy installation
·Cooling by free air convection
·Compatible with Forward phase,Magnetic low voltage,triac Dimmers
·Strong compatibility, flicker-free dimming, PWM output
·Suitable for LED lighting and moving sign applications
Specification
Model
SMT-012-024VT
SMT-024-024VT
output
DC Voltage
12V
24V
Voltage Tolerance
±0.5V
Rated current
2.08A
1.04A
Rated power
24W
input
Voltage Range
100～130VAC / 170~265VAC
Frequency Range
47～63HZ
Power Factor （Typ.）
PF≥0.70
Efficiency（Typ.）
>84%
84%
>84%
AC Current（Typ.）
0.34A@120VAC, 0.18A@220VAC
0.34A@120VAC, 0.18A@220VAC
Leakage current
﹤0.70mA/110VAC / ﹤0.5mA/220VAC
Protection
Short Circuit
Hiccup mode, recovers automatically after fault condition is removed
Over Current
≤1.2*I out
Over Loading
≤120%
Over temperature
100℃±10℃ (The output voltage will turn off when the temperature is higher then100℃±10℃, after the temperature drop off ,it will recovery) automatic
Environment
Working TEMP.
-40～+60℃
Working Humidity
20～90%RH, non-condensing
Storage TEMP. Humidity
-40～+80℃，10～95%RH
TEMP .coefficient
±0.03%/℃（0～50℃）
Vibration
10～500Hz，2G 10min./1 cycle,period for 60min. each along X,Y,Z axes
Safety& EMC
Safety standards
UL8750+UL1310
Withstand voltage
I/P-O/P:1500KVAC
Isolation resistance
I/P-O/P：100MΩ/500VDC/25℃/70%RH
EMC EMISSION
FCC Part 15 B
others
Net. Weight
0.20Kg
Size
155*54*20mm（L*W*H）
packing
350*195*180mm 30PCS/CTN
Notes
1. All parameters if NOT specially mentioned are measured at 110VAC / 220VAC input ,
rated load and 25℃of ambient temperature.
2. To extend the driver's using life ,please reduce the loading at lower input voltage.
3. Loading should be 5-100%.
 |
 |
 |
 |
Mechanical Specification
