UL certificate 24v 100w triac dimmable constant voltage led driver for led light
24v dimmable led driver are suitable for indoor & outdoor LED illuminating lights,LED neon of EnvironmentalLights,LED panel of LG. this series of triac dimmable led driver are have short circuit/overload/over voltage/over temp.
Destription
model
SMT-024-096VTHW
Output
DC Voltage
24V
Voltage Accuracy
±0.5V
Rated current
4.0A
Rated power
96W
Input
Voltage Range
100~277V AC
Frequency Range
47～63HZ
Power Factor ( Typ.）
PF≧0.95/110V,PF≧0.97/277V
Full Load Efficiency(Typ.)
>82%
AC Current（Typ.）
1.33A/110VAC
Inrush Current （Typ.）
20A, 50%, 1.6ms
Leakage current
﹤0.5mA/110V
Protection
Short Circuit
Hiccup mode, recovers automatically after fault condition is removed.
Over temperature
100℃±10℃ shut down o/p voltage, automatically recover after cooling.
Over Loading
≤120% constant current limiting, auto-recovery
Over voltage
≦140VAC(90~135V) , ≦270VAC(170~265V)
Environment
Working TEMP.
-40～+60℃
Working Humidity
20～90%RH,non-condensing
Storage TEM.,Humidity
-40～+80℃，10～95%RH
TEMP.coefficient
±0.03%/℃（0～50℃）
Vibration
10～500Hz，2G 10min./1 cycle，period for 60min.each along X,Y,Z axes
Safety&EMC
Safety standards
UL8750+UL1310
Withstand voltage
I/P-O/P:3.75KVAC
Isolation resistance
I/P-O/P：100MΩ/500VDC/25℃/70%RH
EMC EMISSION
FCC Part 15 B
EMC IMMUNITY
Compliance to EN55015; EN61000-4-2,3,4,5,6,8,11,EN61547 Alight industry level （surge4KV）
Others
Net Weight
1.1Kg
Size
230*70*46mm（L*W*H）
packing
329*279*176mm , 10PCS/ctn
Notes
1. All parameters NOT specially mentioned are measured at 110V/277VAC input , rated load and
25℃of ambient temperature.
2. Tolerance:includes set us tolerance,line regulation and load regulation .
Label
 |
 |
 |
 |
Mechanical Specification
Simple Connection Diagram
Connecting Diagram
Problem analysis
Question1:
Can we make our company information on the label?
Answer:
--As per the policy of ETL/UL, we can not make changes on the labels at liberty. If we make changes as your requirement , then our company will be punished if the ETL/UL department discover it . Really sorry for that and caused you so much trouble..
--If making changes on the labels are necessary for your company, I suggest you multi-list of our ETL/UL certification , then we can help you design the new label as requested.What is your opinion?
Question2:
Why does the 100W-PWM driver (SMT-012-100VT) have 2 x output cables ?
I need a driver with a single 100W output.
Can I draw the entire 200W from one cable ? Internally is it a single output ? just 2 x wires ?
Answer:
Yes, the internally dimmable led driver for SMT-012-100VTHW is single output type and just 2 wires.
