110v 120 volt ac dc 12v led strip power supply 10 amp
SMT-012-120VWJ is a input voltage 100-277vac, output 12v 10a 120w non dimmable non class 2 led driver / power supply. This model follows UL 8750 standard, pass FCC certificate, withstandard voltage 3.75KV, provide 7 years warranty. avaliabel to be widely used in LED indoor applications for LED puck light, LED chandelier,Neon LED of GLLS,led modules of ledwatcher etc..
Specifications
model |
SMT-012-120VWJ |
SMT-024-120VWJ |
|
Output |
DC Voltage |
12V |
24V |
Voltage Accuracy |
±0.5V |
±0.5V |
|
Voltage Regulation |
±0.5% |
||
Load Regulation |
±2%
|
||
Rated current |
10.00A |
5.00A |
|
Rated power |
120W |
||
Input |
Voltage Range |
100~277V AC |
|
Frequency Range |
47~63HZ |
||
Power Factor ( Typ.) |
0.99@120VAC 0.96@277VAC |
0.98@120VAC 0.96@277VAC |
|
Full Load Efficiency(Typ.) |
80%@120V 84%@230V 84%@277V |
85%@120V 88%@230V 88%@277V |
|
AC Current(Typ.) |
1.71A@100VAC |
||
Leakage current |
<0.50mA |
||
Protection |
Short Circuit |
shut down o/p voltage, re-power on to recover after fault condition is removed |
|
Over Loading |
≤120% constant current limiting, auto-recovery |
||
Over temperature |
100℃±10℃ shut down o/p voltage, automatically recover after cooling. |
||
Over voltage |
≦140VAC(100~130V) , ≦270VAC(170~277V) |
||
Environment |
Working TEMP. |
-40~+60℃ |
|
Working Humidity |
20~90%RH,non-condensing |
||
Storage TEM.,Humidity |
-40~+80℃,10~95%RH |
||
TEMP.coefficient |
±0.03%/℃(0~50℃) |
||
Vibration |
10~500Hz,2G 10min./1 cycle,period for 60min.each along X,Y,Z axes |
||
Safety&EMC |
Safety standards |
UL8750, UL1012 |
|
Withstand voltage |
I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC |
||
Isolation resistance |
I/P-O/P:100MΩ/500VDC/25℃/70%RH |
||
EMC EMISSION |
FCC Part 15 B |
||
EMC IMMUNITY |
Compliance to EN61000-4-2,3,4,5,6,8,11,EN61547 Alight industry level (surge4KV) |
||
Others |
Weight |
1.3Kg |
|
Size |
220*93*41mm (L*W*H) |
||
packing |
329*279*176mm , 10PCS/ctn |
||
Notes |
1. All parameters NOT specially mentioned are measured at 110V/277VAC input , rated load and 25℃of ambient temperature. 2. Tolerance:includes set us tolerance,line regulation and load regulation . |
||
Label |
|
Dimension of our 12v 10a UL power supply with junction box:
FAQ: How can we connect multi-LEDs to one led driver?
Answer: During the LED applications, its a common to make the connection of 1 driver for 1 LEDs, but if you would want to connect multi-LEDs to one LED driver, that is acceptable as well. but kindly note just connected the LEDs in parallel to a constant voltage LED driver, so that the brightless of each LEDs will be the same and won't cause drop voltage problem. see below connection diagram:
More questions about LED driver connection, don't hesitate to contact us, we will have engineer team to work for you.