12v 20w 30w 48w dimmable top led driver suppliers
The SMT-012-030VTHWH 30w dimmable led driver products is CE,RoHS certification for use in Europen and covered by 7 year manufacturer limited warranty. Typically smaller, lighter and less expensive than magnetic drivers. LED Drivers are fully dimmable with any standard TRIAC dimmer switch.
Specification
|
model |
SMT-012-030VTHWH |
SMT-024-030VTHWH |
|
|
Output |
DC Voltage |
12V |
24V |
|
Voltage Regulation |
±0.5% |
||
|
Rated current |
2.5A |
1.25A |
|
|
Rated power |
30W |
30W |
|
|
Input |
Voltage Range |
220-240V AC |
|
|
Frequency Range |
47～63HZ |
||
|
Power Factor ( Typ.） |
PF≧0.98/200VAC PF≧0.98/230VAC PF≧0.98/240VAC(Full loading) |
||
|
Full Load Efficiency（Typ.） |
>82% |
>81% |
|
|
AC Current（Typ.） |
0.22A |
0.22A |
|
|
Leakage current |
<0.50mA |
||
|
Protection |
Over temperature |
100℃± 10℃ shut down o/p voltage ,re-power on to recover |
|
|
Short Circuit |
Hiccup mode, recovers automatically after fault condition is removed |
||
|
Over Current |
≦ 1.2 *Iout |
||
|
Over Loading |
≤120% |
||
|
Environment |
Working TEMP. |
-40～+60℃ |
|
|
Working Humidity |
20～90%RH,non-condensing |
||
|
Storage TEM.,Humidity |
-40～+80℃，10～95%RH |
||
|
TEMP.coefficient |
±0.03%/℃（0～50℃） |
||
|
Vibration |
10-500Hz,2G 10min./1 cycle,period for 72min,each along X,Y,Z axes. |
||
|
Safety&EMC |
Safety standards |
EN61347-1 EN61347-2-13 |
|
|
Withstand voltage |
I/P-O/P:3.75KVAC |
||
|
Isolation resistance |
I/P-O/P:100MΩ/500VDC/25℃/70%RH |
||
|
EMC EMISSION |
EN55015,EN61000-3-2,3 (≧60%loading) |
||
|
Others |
Weight |
0.21KG |
|
|
Size |
155*54*20mm (L*W*H) |
||
|
packing |
160*60*23mm for inner box ; 350*240*130mm for carton 40PCS/CTN |
||
|
Notes |
1. All parameters NOT specially mentioned are measured at 230VAC input , rated load and 25℃ of ambient temperature. 2. Tolerance: includes set us tolerance, line regulation and load regulation . 3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be adjusted. |
||
 |
 |
 |
 |
Mechanical Specification
-- Output LED SEC output Positive (LED+) , output negative(LED-). Connected to LED light.
-- Input (L) and (N) with wire to be connected with AC
-- Suggested wire diameter:Input 0.75-2.5m㎡; Output:0.5-2.5m㎡.
Note: Please make sure you connect these correctly otherwise your product will not function correctly and could be damaged.
Dimming Operation
Ø Output constant current level can be adjusted through input terminal of the AC phase line(L) by connection a Triac dimmer/light system.
Ø Usually matching with leading edge and trial edge Triac Dimmers both;
Ø please try to use the small power dimmer, have access to a wider dimming range, high-power dimmer is difficult to achieve the output current to zero
Ø please try to use dimmers with power at least 3 times as the output power of the driver.
Derating Curve
Ø Load carried in accordance with the load derating curve, according to the ambient temperature derating, in order to extend the running life.
Connecting Diagram
Compatible Lighting Type
5m White LED Strip Light - HighLight Series Tape Light - High CRI - 12V/24V - IP20 of superbrightleds brand can be matched with products of 30w dimmable led driver manufacturers from Swinpower.
  |
|
Related Products
|
|
Swinpower is the top led driver suppliers who offers dimmable led driver. It is suitable for 12v LEDs application to protects them from line-voltage fluctuations, or for any other 12Volts DC electrical device
Model：SMT-012-100VTHWH intput voltage：200- 240VAC Efficiency > 82% Size：230*70*46mm（L*W*H） Weight：1.1Kg/pcs |
