CE ROHS 60w 12vdc constant voltage class 2 triac dimmable led strip driver
SMT-012-060VTHWH is CE RoHS compliant which conforms to EU safety standards.The triac dimmable power supply has strong compatibility when it work with leading edge dimmers. BerKer dimmer 2875 is a better choice when selecting the dimmers.
■ Specification
|
model |
SMT-012-060VTHWH |
SMT-024-060VTHWH |
|
|
Output |
DC Voltage |
12V |
24V |
|
Voltage Regulation |
±0.5% |
||
|
Rated current |
5.00A |
2.50A |
|
|
Voltage Tolerance |
±0.5V |
||
|
Rated power |
60W |
60W |
|
|
Input |
Voltage Range |
200-240VAC |
|
|
Frequency Range |
47～63HZ |
||
|
Full Load Efficiency（Typ.） |
>85% |
||
|
AC Current（Typ.） |
0.38A |
||
|
Leakage current |
<0.50mA |
||
|
Power Factor ( Typ.） |
PF≧0.98/200VAC PF≧0.98/230VAC PF≧0.98/240VAC(Full loading) |
||
|
protection |
Over temperature |
100℃± 10℃shut down o/p voltage ,re-power on to recover |
|
|
Short Circuit |
Hiccup mode, recovers automatically after fault condition is removed |
||
|
Over Loading |
≤120% |
||
|
Over Current |
≦ 1.2 *Iout |
||
|
Environment |
Working TEMP. |
-40～+60℃ |
|
|
Working Humidity |
20～90%RH,non-condensing |
||
|
Storage TEM.,Humidity |
-40～+80℃，10～95%RH |
||
|
TEMP.coefficient |
±0.03%/℃（0～50℃） |
||
|
Vibration |
10～500Hz，2G 10min./1 cycle，period for60min. each along X,Y,Z axes |
||
|
Safety&EMC |
Safety standards |
EN61347-1 EN61347-2-13 |
|
|
Withstand voltage |
I/P-O/P:3.75KVAC |
||
|
Isolation resistance |
I/P-O/P:100MΩ/500VDC/25℃/70%RH |
||
|
EMC EMISSION |
EN55015,EN61000-3-2,3 (≧60%loading) |
||
|
Others |
Weight |
0.35KG |
|
|
Size |
178*61*24mm (L*W*H) |
||
|
packing |
185*65*28mm inner box 290*215*240mm outside carton 20PCS/CTN |
||
|
Notes |
1. All parameters NOT specially mentioned are measured at 230VAC input , rated load and 25℃ of ambient temperature. 2. Tolerance: includes set us tolerance, line regulation and load regulation . 3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be adjusted. |
||
 |
 |
 |
 |
■Mechanical Specification
Ø Input (L) and (N) with wire to be connected with AC
Ø Output LED SEC output Positive (LED+) , output negative(LED-). Connected to LED light.
Ø Suggested wire diameter:Input 0.75-2.5m㎡; Output:0.5-2.5m㎡.
Note:Please make sure you connect these correctly otherwise your product will not function correctly and could be damaged.
■Dimming Operation
Ø Output constant current level can be adjusted through input terminal of the AC phase line(L) by connection a Triac dimmer/light system.
Ø Usually matching with leading edge and trial edge Triac Dimmers both;
Ø please try to use the small power dimmer, have access to a wider dimming range, high-power dimmer is difficult to achieve the output current to zero.
Ø please try to use dimmers with power at least 3 times as the output power of the driver.
■Derating Curve
Ø Load carried in accordance with the load derating curve, according to the ambient temperature derating, in order to extend the running life.
■Connecting Diagram
■ Simple Connection Diagram
■ Instruction:
Ø This driver should be installed by qualified and professional person;
Ø Please make sure the driver is installed with adequate ventilation around it to allow for heat dissipation.
Ø Ensure that wiring is correct before test in order to avoid light and power supply damage;
Ø If the dimmable LED drivers do not work normally, pl. don’t maintain privately, but contact us: sales9@smartselectronics.com Or take a phonecall: 0086-18016688251
Official website: www.smarts-electronics.com or www.swinpower.com
Compatible Dimmer Type
The led driver dimmable 12v 60w has 12VDC and 24VDC option. It is better to used for indoors lighting for IP20 with plastic case. 5 years warranty are ensured. LED hut Powermaster LED 2M Flexi Strip Light is one of the choices.
|
Related Products
|
|
This is a 12v led power supply dimmable. The output current is 4A and the output power is 48w. Without limited load. 5 years warranty.
Mode：SMT-012-048VT intput voltage：100-130/170-265VAC Output current: 4A Dimming Mode:triac dimming Size：178*61*24m （L*W*H） Certification:ETL,CE, RoHS,FCC
|
