12v dc 50 watt 60watt lighting transformer
Smarts offers 12vdc 50w 60w Constant Voltage LED Transformer with a universal AC input of 100-265VAC and a 12VDC output of 5 amp or 60 watts, 230v to 12v transformer lighting for crompton.
Features
· IP67 design for indoor or outdoor installations
· Cooling by free air convection
·Protections:Short circuit/Overload/Over temperature
·100% full load burn-in test
·Cooling by free air convection
·Slim shape, compact size
·2 years warranty
Specification sheet
SPECIFICAION
MODEL
SMT-012-060VN
SMT-024-060VN
OUTPUT
DC VOLTAGE
12V
24V
RATED CURRENT
5.0A
2.5A
CURRENT RANGE
0~5A
0~2.5A
RATED POWER
60W
60W
RIPPLE&NOISE(max)
<240mV
<240mV
voltage TOLERANCE
12V±5%
24V±5%
VOLTAGE TOLERANCE
±0.5V
±0.5V
SETUP RISE TIME
80ms/110VAC
80ms/110VAC
HOLD UP TIME(Typ.)
60ms/110VAC
60ms/110VAC
INPUT
VOLTAGE RANGE
170~265Vac
170~265Vac
FREQUENCY RANGE
50~60Hz
50~60Hz
POWER FACTOR(Typ.)
no PFC
no PFC
EFFICIENCY(Typ.)
﹥83%
﹥84%
AC CURRENT(Typ.)
0.49A/220V
0.5A/220V
INRUSH CURRENT (Typ.)
COLD START 30A/110~220VAC
PROTECTION
Short circuit
Protection type:recovers automatically after condition is removed
Overload
5-7.5A
2.5-3.75A
Over temperature
Protection type:Shut down o/p voltage,re-power on to removed
ENVIRONMENT
WORKING TEMP.
-30~+50℃ (Refer to output load derating curve)
WORKING HUMIDITY
20~99% RH non-condensing(Waterproof)
STORAGE TEMP.,HUMIDITY
-40~+80℃,10~99%RH
SAFETY&EMC
SAFETY STANDARDS
EN61347-1;EN61347-2-13;SELV;IP67 approved
WITHSTAND VOLTAGE
I/P-O/P:2KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
EMC Test Standards
NOTE
1.All parameters NOT specially mentoned are measured at 220VAC input,rated load and 25℃ of ambient temperature.
2.Ripple&noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf&10uf parallel
capacitor.
3.Tolerance:includes set up tolerance,line regulation and load regulation.
Label
Mechanical Specification
