20-40vdc 1400ma led driver with 5 years warranty
The 1400ma led driver is dali dimmable with constant current working mode. it's suitable for dry/damp/wet locations.Working in harsh environments, the service life is much longer than done's 60W constant current LED driver.
Feture |
|
·Output constant current
·Range 100-265VAC ·Built-in PFC function, PF> 0.9 ·Efficiency >90% ·Protections:short circuit/over current/over temperature ·Cooling by free air convection ·Dimming function:DALI dimmable ·Suitable for LED lighting applications by PWM output ·Compliance to worldwide safety regulations for lighting ·Suitable for dry/damp/wet locations ·5 years warranty |
|
Specification
Model |
SMT-100-0500CM |
SMT-056-1050CM |
SMT-040-1400CM |
SMT-036-1750CM |
||||
Output |
DC Voltage |
60-100V |
40-56V |
20-40V |
20-36V |
|||
Voltage Accuracy |
±0.5V |
|||||||
Rated current |
0~500mA |
0~1050mA |
0~1400mA |
0~1750mA |
||||
Rated power |
50W |
58W |
56W |
63W |
||||
Input |
Voltage Range |
100-265VAC |
||||||
Frequency Range |
47~63HZ |
|||||||
Power Factor ( Typ.) |
PF≧0.92/120V / PF≧0.95/220V |
|||||||
Full Load Efficiency(Typ.) |
>86%(120V) / >88%(220V) |
>86%(120V) / >89%(220V) |
>88%(120V) / >90%(220V) |
>88%(120V) / >90%(220V) |
||||
AC Current(Typ.) |
0.990A(120V) 0.960A(220V) |
1.055A(120V) 1.042A(220V) |
1.047A(120V) 1.031A(220V) |
1.056A(120V) 1.031A(220V) |
||||
Leakage current |
﹤0.65mA/120VAC / ﹤0.75mA/220VAC |
|||||||
Protection |
Short Circuit |
Protection type: Hiccup mode, recovers automatically after fault condition is removed |
||||||
Over Current |
≦1.4*I out |
|||||||
Over temperature |
100℃±10℃ shut down o/p voltage, re-power on to recover |
|||||||
Environment |
Working TEMP. |
-40~+50℃ |
||||||
Working Humidity |
20~95%RH,non-condensing |
|||||||
Storage TEM.,Humidity |
-40~+80℃,10~95%RH |
|||||||
TEMP.coefficient |
±0.03%/℃(0~50℃) |
|||||||
Vibration |
10~500Hz,5G 12min./1 cycle,period for 72min.each along X,Y,Z axes |
|||||||
Safety&EMC |
Safety standards |
EN61347-1 EN61347-2-13 IP67 |
||||||
Withstand voltage |
I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC |
|||||||
Isolation resistance |
I/P-O/P I/P-FG O/P-FG:100MΩ/500VDC/25℃/70%RH |
|||||||
EMC EMISSION |
Compliance toEN55015,EN61000-3-2 (≧50%load) |
|||||||
EMC IMMUNITY |
Compliance to EN61000-4-2,3,4,5,6 ,11,EN61547,A light industry level (surge4KV) |
|||||||
Others |
Weight |
1Kg |
||||||
Size |
210*69*45mm(L*W*H) |
|||||||
packing |
355*215*215mm/10pcs/CTN , 220*70*50 mm for inner box |
|||||||
Notes |
1. All parameters NOT specially mentioned are measured at 220VAC input , rated load and 25℃ of ambient temperature. 2. Ripple& noise are measured at 20MHz of bandwidth by using a 12”twisted pair-wire terminated with a 0.1uf &47uf parallel capacitor. 3. Tolerance:includes set us tolerance,line regulation and load regulation . |
Derating Curve
* Load carried in accordance with the load derating curve, according to the ambient temperature derating, in order to extend the service life
Mechanical Specification
※Input Rubber cable H03VV-F 3G 1.0㎡,the green/yellow cable connect with (FG),Brown with AC (L),Blue with AC(N)
※Input with Live Wire(L) Neutral Wire (N)
※Output LED SEC (LED+),(LED-)
※Signal Dimming (DA1), (DA2) ( DALI Non polar!)
■Dimming Operation
※Connect DALI signal cable of driver with DALI cable in Control then dim after controller scan and assign address