240vac CE triac & 0 10v constant current led driver 12v 250ma-700ma power supply

240vac CE triac & 0 10v constant current led driver 12v 250ma-700ma power supply

CE certified multi-current dip switch triac & 0-10v dimmable led driver, power factor up to 0.9, built-in active PFC function, work efficiency can reach 74%, but also has over temperature, overload, short circuit protection function, safe and reliable

  Specification  

  Mechanical Specification 

 ※Input terminals "Black" and "White" to connect to AC L and N.

 ※Output LED SEC output Positive (LED+) , output negative(LED-). Connected to LED light.

※Output terminals DIM (+) to 0/1-10V dimmer signal(+ ),DIM (-) white connect to 0/1-10V dimmer signal (-)

※Please DO NOT connect “DIM-“ to “LED-“, “DIM+” to “ LED+” ,or other incorrect connection.

Note: Please make sure you connect these correctly otherwise your product will not function correctly and could be damaged

 Dimming Operation 

Ø Using TRIAC/Phase cut dimming

1.The Pulse-Width Modulation (PWM) of output voltage can be adjusted through input terminal of the AC phase line(L) by connection a phase /Triac dimmer of lighting system.

2.Work with forward phase /leading edge ,MLV and reverse phase /trailing edge ,ELV,TRIAC dimmers. 

3.Please try to use dimmers with power at least 1.5 times as the output power of the driver.

  Related Products