IP67 12VDC 100watt constant voltage led driver
12vdc 100w constant voltage LED driver supply Protection type:Shut down o/p voltage,re-power on to removed with 2 years warranty. with AMP LED In-Grade Light AWL-5002-4-B-BZ can save power to the greatest extent
Features
· IP67 design for indoor or outdoor installations
· Cooling by free air convection
·Protections:Short circuit/Overload/Over temperature
·100% full load burn-in test
·Cooling by free air convection
·Slim shape, compact size
·2 years warranty
Specification sheet
SPECIFICAION
MODEL
SMT-012-100VN
SMT-024-100VN
OUTPUT
DC VOLTAGE
12V
24V
RATED CURRENT
8.0A
4.0A
CURRENT RANGE
0~8.33A
0~4.16A
RATED POWER
100W
100W
RIPPLE&NOISE(max)
<450mV
<450mV
VOLTAGE TOLERANCE
±0.5V
±0.5V
SETUP RISE TIME
80ms/220VAC
HOLD UP TIME(Typ.)
60ms/220VAC
INPUT
VOLTAGE RANGE
170~265VAC
FREQUENCY RANGE
50~60Hz
POWER FACTOR(Typ.)
EFFICIENCY(Typ.)
﹥83%
﹥84%
AC CURRENT(Typ.)
0.92A/110VAC, 0.86A/220VAC
INRUSH CURRENT (Typ.)
COLD START 50A/110VAC, 220VAC
PROTECTION
Short circuit
Protection type:recovers automatically after condition is removed
Overload
141W
152W
Over temperature
Protection type:Shut down o/p voltage,re-power on to removed
ENVIRONMENT
WORKING TEMP.
-30~+50℃ (Refer to output load derating curve)
WORKING HUMIDITY
20~99% RH non-condensing(Waterproof IP67)
STORAGE TEMP.,HUMIDITY
-40~+80℃,10~99%RH
SAFETY&EMC
SAFETY STANDARDS
EN61347-1;EN61347-2-13;SELV;IP67 approved
WITHSTAND VOLTAGE
I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
EMC Test Standards
NOTE
1.All parameters NOT specially mentoned are measured at 110VAC,220VAC input,rated load and 25℃ of ambient temperature.
2.Ripple&noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf&10uf parallel
capacitor.
3.Tolerance:includes set up tolerance,line regulation and load regulation.
Label
Mechanical Specification
FAQ
1.What is the wire gauge that fits into the ETL Triac Dimmable LED Driver?
Answer: 14-26 AWG
2.What is the difference between the 20w/45w UL and 24w/48w ETL model?
Answer:
-- when you install a 20w/45w UL led driver in your led light you should consider abbot min. 55% load limtation. If it less than 55%, the led light will have flick problem. But the 20w/45w ETL model is no load limitation. You can load it in the led light 1-48w.
-- the height of 24w(20mm)/48w(24mm) is lower than 20w(28mm)/45w(34mm).
3.If the connection load less than 55% for the load limitation led driver, what will happen?
Answer: If you take our 1.0V triac dimmable led drivers, the led light will have flick problem
4.Can we make our company information on the label?
Answer:
--As per the policy of ETL/UL, we can not make changes on the labels at liberty. If we make changes as your requirement , then our company will be punished if the ETL/UL department discover it . Really sorry for that and caused you so much trouble..
--If making changes on the labels are necessary for your company, I suggest you multi-list of our ETL/UL certification , then we can help you design the new label as requested.What is your opinion?
5. Do you have MOQ?
--We don't have MOQ, we welcome your trial/small order.
6.
5. Does your company have any Triac dimmers recommendation for European market?
1） Busch-2250UGIRA-030200
2） Berker-2875GUNG266GDECLIPSAL (奇胜前沿、后沿）: 32E450LM-TM 32E450L-T
C2032E450L-T SC2032E450L-T SL2032E450L-T
P2032E450LM-TM P2032E450L-T 1920E450L
3） CLIPSAL
4） Lutron (220VAC types)
More information if you would like to know Smarts Electronics’ triac dimmable led driver, you can login http://www.smarts-electronics.com/ Or contact with Mr. Steven(skype: steven821228 mail:steven@smartselectronic.com.cn)
