Aluminum case 2100mA 79w dali dimmable led driver for led lighting
2100mA constant current power supply is a model of dali dimming controller.the wattage range is 30w-200w, with short-circuit and overload protection. It can effectively protect Zumtobel's LED downlight 2100ma, allowing it to work stably in any environment.
Specification
Model |
SMT-034-2400CM |
SMT-036-2100CM |
SMT-040-2000CM |
SMT-057-1400CM |
SMT-067-1020CM |
||
Output |
DC Voltage |
18~34V |
20~36V |
20~40V |
35~57V |
36~67V |
|
Voltage Accuracy |
±0.5V |
||||||
Rated current |
0~2400mA |
0~2100mA |
0~2000mA |
0~1400mA |
0~1020mA |
||
Rated power |
81W |
79W |
80W |
80W |
80w |
||
Input |
Voltage Range |
100-265VAC |
|||||
Frequency Range |
47~63HZ |
||||||
Power Factor ( Typ.) |
PF≧0.95/100V, 220V |
||||||
Full Load Efficiency(Typ.) |
>89%(110,220V) |
>88%(110,220V) |
>88%(110,220V) |
>88%(110,220V) |
>88%(110,220V) |
||
AC Current(Typ.) |
0.960A(110,220V) |
1.042A(110,220V) |
1.031A(110,220V) |
1.038A(110,220V) |
1.037A(110,220V) |
||
Leakage current |
﹤0.75mA/110, 220VAC |
||||||
Protection |
Short Circuit |
Protection type: Hiccup mode, recovers automatically after fault condition is removed |
|||||
Over Current |
≦1.4*I out |
||||||
Over temperature |
100℃±10℃ shut down o/p voltage, re-power on to recover |
||||||
Environment |
Working TEMP. |
-40~+50℃ |
|||||
Working Humidity |
20~95%RH,non-condensing |
||||||
Storage TEM.,Humidity |
-40~+80℃,10~95%RH |
||||||
TEMP.coefficient |
±0.03%/℃(0~50℃) |
||||||
Vibration |
10~500Hz,5G 12min./1 cycle,period for 72min.each along X,Y,Z axes |
||||||
Safety&EMC |
Safety standards |
EN61347-1 EN61347-2-13 IP66 |
|||||
Withstand voltage |
I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC |
||||||
Isolation resistance |
I/P-O/P I/P-FG O/P-FG:100MΩ/500VDC/25℃/70%RH |
||||||
EMC EMISSION |
Compliance toEN55015,EN61000-3-2 (≧50%load) |
||||||
EMC IMMUNITY |
Compliance to EN61000-4-2,3,4,5,6 ,11,EN61547,A light industry level (surge4KV) |
||||||
Others |
Weight |
1.3Kg |
|||||
Size |
200*68*45mm(L*W*H) |
||||||
packing |
324*298*176mm/10pcs/CTN 240*70*50 mm for inner box |
||||||
Not es |
1. All parameters NOT specially mentioned are measured at 110V, 220VAC input , rated load and 25℃of ambient temperature. 2. Ripple& noise are measured at 20MHz of bandwidth by using a 12”twisted pair-wire terminated with a 0.1uf &47uf parallel capacitor. 3. Tolerance:includes set us tolerance,line regulation and load regulation . |
Mechanical Specification
Derating curve
Application
- 1.Indoor LED illuminating lights
- 2.LED Neon, LED urban Decoration
- 3.LED Lighting Advertising,LED Display
- 4.Safety Protection Apparatus
- 5.Telecommunications, Networks
- 6.Vehicle Lights, Controller Panels