CE listed high circuit 220V ac to dc 28V 1400mA constant current led driver variable
SMT-28-1400CDH is 1400mA 40W 0-10V dimmable ac to dc constant current led driver . The input voltage range is 180-265Vac and output voltage range is 16-28Vdc.Can be Parmida with Maxlite PLED-T818W3KV2-AB-CL-20P.
Features of led power supply
·Output constant current
·Range 180-265VAC
·Built-in PFC function
·Efficiency 88%
·Protections:short circuit/over current/over voltage
·Cooling by free air convection
·IP20 design for indoor installation .
·Dimming function:0-10V/ 1-10V/ 10V PWM or potentiometer.
·Dimming range:0-100%
·Suitable for LED lighting and moving sign applications with dimming
·Compliance to worldwide safety regulations for lighting
·3 years warranty
Specification of led power supply:
|
Model |
SMT-45-0900CDH |
SMT-42-0960CDH |
SMT-40-1050CDH |
SMT-28-1400CDH |
||
|
Output |
DC Current |
900mA |
900mA |
1050mA |
1400mA |
|
|
|
Current Accuracy |
±3% |
||||
|
|
Voltage Range |
33-45V |
25-42V |
28-40V |
16-28V |
|
|
|
Rated power |
40W |
40W |
40W |
40W |
|
|
Input |
Voltage Range |
180～265VAC |
||||
|
|
Frequency Range |
47～63HZ |
||||
|
|
PF(Typ.） |
PF>0.9 |
||||
|
|
Full Load Efficiency（Typ） |
>86% |
>87% |
>87% |
>86% |
|
|
|
AC Current (Typ.） |
0.24A |
0.26A |
0.23A |
0.25A |
|
|
|
Leakage current |
﹤0.7mA/110-220VAC |
||||
|
Protection |
Short Circuit |
Protection type: Hiccup mode, recovers automatically after fault condition is removed |
||||
|
|
Over voltage |
≦280VAC |
||||
|
|
Over temperature |
100℃±10℃ shut down o/p voltage, re-power on to recover |
||||
|
Environme |
Working TEMP. |
-40～+50℃ |
||||
|
|
Working Humidity |
20～95%RH,non-condensing |
||||
|
|
Storage TEM.,Humidity |
-40～+80℃，10～95%RH |
||||
|
|
TEMP.coefficient |
±0.03%/℃（0～50℃） |
||||
|
|
Vibration |
10～500Hz，5G 12min./1 cycle，period for 72min.each along X,Y,Z axes |
||||
|
Safety&EMC |
Safety standards |
EN61347-1 EN61347-2-13. IP40 |
||||
|
|
Withstand voltage |
I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC |
||||
|
|
Isolation resistance |
I/P-O/P I/P-FG O/P-FG：100MΩ/500VDC/25℃/70%RH |
||||
|
|
EMC EMISSION |
Compliance to EN55015,EN61000-3-2 (≧50%Load) |
||||
|
|
EMC IMMUNITY |
Compliance to EN61000-4-2,3,4,5,6,8,11,EN61547,A light industry level |
||||
|
Others |
Weight |
0.17Kg |
||||
|
|
Size |
110*45*26mm（L*W*H） |
||||
|
|
packing |
290*275*195mm/50pcs /CTN |
||||
|
Notes |
1. All parameters NOT specially mentioned are measured at 220VAC input , rated load and 25℃of ambient temperature. 2. Ripple& noise are measured at 20MHz of bandwidth by using a 12”twisted pair-wire terminated with a 0.1uf &47uf parallel capacitor. 3. Tolerance:includes set us tolerance,line regulation and load regulation . |
|||||
| Lable |
 |
|||||
 |
 |
 |
 |
FAQ
Can I use a dimmer switch with LED lights?
Both use electricity and both give off light, but that's where the similarity ends. The solution is to buy a dimmer switch rated for both CFL and LED bulbs. Two reputable manufacturers of CFL/LED dimmers are Leviton and Lutron; both provide lists of bulbs they've verified will work with their dimmers.
