China Suppiler dimmable lighting power supply
Smarts are in the field of designing and manufacturing innovative LED drivers and triav, 0-10V & DALI dimmable LED drivers for lighting & electrical manufacturers, distributors, wholesalers, retrofit projects, professional lighting chain stores etc,It has more advantages than osram dimmable led driver in dimming method and adapts to major markets
Specification
Model
SMT-012-080VM
SMT-024080VM
SMT-036-080VM
WMT-048-080VM
Output
DC Voltage
12V
24V
36V
48V
Voltage Tolerance
±3%
Rated current
0~6.6A
0~3.3A
0~2.2A
0~1.66A
Rated power
80W
80W
80W
80W
Input
Voltage Range
100-130VAC/170-265VAC
Frequency Range
47~63HZ
Power Factor(Typ.)
PF≧0.90/110V / PF≧0.90/220V
Full Load Efficiency(Typ.)
>88%
>88%
>88%
>88%
AC Current(Typ.)
0.92A/110VAC
0.46A/220VAC
Leakage current
﹤0.5mA/110V , ﹤0.7mA/220VAC
Protection
Short Circuit
Protection type: Hiccup mode, recovers automatically after fault condition is removed
Over Load
≦120%
Over Circuit
≦1.4*I out
Over temperature
100℃±10℃ shut down o/p voltage, re-power on to recover
Environment
Working TEMP.
-40~+60℃
Working Humidity
20~95%RH,non-condensing
Storage TEM.,Humidity
-40~+80℃,10~95%RH
TEMP.coefficient
±0.03%/℃(0~50℃)
Vibration
10~500Hz,5G 12min./1 cycle,period for 72min.each along X,Y,Z axes
Safety&EMC
Safety standards
EN61347-1 EN61347-2-13 IP67
Withstand voltage
I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC
Isolation resistance
I/P-O/P I/P-FG O/P-FG:100MΩ/500VDC/25℃/70%RH
EMC EMISSION
Compliance toEN55015,EN61000-3-2 (≧50%load)
EMC IMMUNITY
Compliance to EN61000-4-2,3,4,5,6 ,11,EN61547,A light industry level (surge4KV)
Others
Weight
1.1Kg
Size
200*68*46mm(L*W*H)
packing
329*279*176mm/10pcs/CTN
Notes
1. All parameters NOT specially mentioned are measured at 110V, 220VAC input , rated load and 25℃of ambient temperature.
2.Tolerance:includes set us tolerance, line regulation and load regulation .
3.The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again
Label
Mechanical Specification
※Input with Live Wire(L) Neutral Wire (N)
※Output LED SEC output Positive(LED+),output negative(LED-).Connected to LED Lamps.
※Signal Dimming (DA1), (DA2) DALI Non polar!Connected to the BUS of the DALI Master.
※ When installing the LED driver and making input and output connections, cross-section area of conductor for input and output terminal block:0.75mm²(cord type: H03VVH2-F or H03VV-F).
※Please make sure you connect these correctly otherwise your product will not function correctly and could be damaged.
Opreation reference 1
Opreation reference 2
■Instruction:
1)This driver should be installed by qualified and professional person;
2)Please make sure the transformer is installed with adequate ventilation around it to allow for heat dissipation.
3)Ensure that wiring is correct before test in order to avoid light and power supply damage;
Dimming Operation
※Connect the Dali signal line to the Dali bus of the controller (the Dali Master).
After Dali Master scanning and address assignment, the driver can be successfully dimmed.
Please refer to Diagram 1
※Notice:In the market, some DALI controllers has bus-powered functions .If not,please add an extra power supply.(DALI Power).
※Any incorrect connecting of signal line and output line would damage the master.
FAQ
1. If the connection load less than 55% for the load limitation led driver, what will happen?
Answer: If you take our 1.0V triac dimmable led drivers, the led light will have flick problem.
2. Can we make our company information on the label?
Answer:
--As per the policy of ETL/UL, we can not make changes on the labels at liberty. If we make changes as your requirement , then our company will be punished if the ETL/UL department discover it . Really sorry for that and caused you so much trouble..
--If making changes on the labels are necessary for your company, I suggest you multi-list of our ETL/UL certification , then we can help you design the new label as requested.