Dimming 32 volt constant current led backlight LED tube driver 300ma IP20
SMT-40-0300CDH PWM 0-10V dimming control constant current led power supply are meet CE ROHS European market requirement. LED tube light driver has advantages over osram led driver in the certificate, complete certificate can meet the needs of major markets.
Specification:
Model |
SMT-45-0250CDH |
SMT-40-0300CDH |
SMT-35-0350CDH |
SMT-30-0400CDH |
||
Output |
DC Current |
350mA |
300mA |
350mA |
400mA |
|
|
Current Accuracy |
±3% |
||||
|
Voltage Range |
33-45V |
28-40V |
23-35V |
18-30V |
|
|
Rated power |
12W |
12W |
12W |
12W |
|
Input |
Voltage Range |
180~265VAC |
||||
|
Frequency Range |
47~63HZ |
||||
|
PF(Typ.) |
PF>0.9 |
||||
|
Full Load Efficiency(Typ) |
>86%(110V) >88%(220V) |
>86%(110V) >88%(220V) |
>86%(110V) >88%(220V) |
>86%(110V) >88%(220V) |
|
|
AC Current (Typ.) |
0.104A(110V) 0.106A(220V) |
0.102A(110V) 0.103A(220V) |
0.102A(110V) 0.103A(220V) |
0.101A(110V) 0.103A(220V) |
|
|
Leakage current |
<0.72mA/110VAC / ﹤0.75mA/220VAC |
||||
Protection |
Short Circuit |
Protection type: Hiccup mode, recovers automatically after fault condition is removed |
||||
|
Over Current |
≦1.4*Iout |
||||
|
Over temperature |
100℃±10℃ shut down o/p voltage, re-power on to recover |
||||
Environment |
Working TEMP. |
-40~+50℃ |
||||
|
Working Humidity |
20~95%RH,non-condensing |
||||
|
Storage TEM.,Humidity |
-40~+80℃,10~95%RH |
||||
|
TEMP.coefficient |
±0.03%/℃(0~50℃) |
||||
|
Vibration |
10~500Hz,5G 12min./1 cycle,period for 72min.each along X,Y,Z axes |
||||
Safety&EMC |
Safety standards |
EN61347-1 EN61347-2-13. IP20 |
||||
|
Withstand voltage |
I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC |
||||
|
Isolation resistance |
I/P-O/P I/P-FG O/P-FG:100MΩ/500VDC/25℃/70%RH |
||||
|
EMC EMISSION |
Compliance to EN55015,EN61000-3-2 (≧50%Load) |
||||
|
EMC IMMUNITY |
Compliance to EN61000-4-2,3,4,5,6,8,11,EN61547,A light industry level |
||||
|
SIZE | 85*45*26mm | ||||
label |
|
Can one 0-10v dimmer connect two of same model constant current led driver?
YES. if the specs of 2 led drivers are all the same, its allowed to connect into one 0-10v dimmer. but if there are 2 different constant current led drivers connect to one 0-10v dimmer, it will cause the dimming effect difference happen in each drivers.
Dimming diagram of 0-10v dimming led driver
Note: dimming wires is located in the dc output of our dimmable driver.
If you have any questions please contact with us.