Intertek 2400ma 80w led downlight transformer
Operating at 80 Watts, dimmable electronic transformer constant current LED driver shows an input voltage of 100-130VAC to an output voltage of 15-34VDC. This LED power supply features built-in active power factor correction and an aluminum housing for a powerful, durable design.SMARTS's 80W power supply can be used with a junction box, which is easier to install and use than SloanLED's 80W constant current power supply.
Specification
Model
SMT-034-2400CT
SMT-090-0900CT
SMT-080-1050CT
SMT-067-1200CT
Output
DC Current
2400mA
900mA
1050mA
1200mA
Current Accuracy
±5%
Voltage Range
15-34V
70-90V
55-80V
40-67V
Rated power
80W
80W
80W
80W
Input
Voltage Range
90-130VAC / 170~250VAC
Frequency Range
47~63HZ
Power Factor (Typ.)
PF≧0.93/110V ; PF≧0.95/220V ; PF≧0.94/250V
Full Load Efficiency(Typ.)
>85%
>85%
>85%
>85%
AC Current(Typ.)
0.14A/110VAC 0.12 A/220VAC 0.01A/250VAC
Leakage current
<0.27mA/110VAC; ﹤0.25mA/220VAC
Protection
Short Circuit
Hiccup mode, recovers automatically after fault condition is removed.
Over voltage
≦270VAC
Environment
Working TEMP.
-40~+60℃
Working Humidity
20~90%RH,non-condensing
Storage TEM.,Humidity
-40~+80℃,10~95%RH
TEMP.coefficient
±0.03%/℃(0~50℃)
Vibration
10~500Hz,2G 10min./1 cycle,period for 60min.each along X,Y,Z axes
Safety&EMC
Safety standards
EN-60950-1, EN-61347-1-2
Withstand voltage
I/P-O/P:3.75KVAC
Isolation resistance
I/P-O/P:100MΩ/500VDC/25℃/70%RH
EMC EMISSION
Compliance toEN55015,EN61000-3-2 (≧50%load)
EMC IMMUNITY
Compliance to EN55015,EN61000-4-2,3,4,5,6,8,11,A light industry
level (surge4KV)
Others
Weight
0.34Kg/pcs
Size
200*68*45mm(L*W*H)
packing
324*298*176mm
Notes
1. All parameters NOT specially mentioned are measured at 110V/230VAC input , rated load and
25℃of ambient temperature.
2. Ripple& noise are measured at 20MHz of bandwidth by using a 12”twisted pair-wire terminated with a
0.1uf &47uf parallel capacitor.
3. Tolerance:includes set us tolerance,line regulation and load regulation .
Physical size
l Input power cord: AC (L), (N), and earth wire (G)
l Output Red is(DIM+),Black is(DIM-)
Dimming Operation
1. Output constant current level can be adjusted through input terminal of the AC phase line(L) by connection a triac dimmer.
2. Compatible with Leading edge or tailing edge triac dimmers.
3. please try to use the small power dimmers, which can be accessed to a wider dimming range, high-power dimmer is difficult to achieve the output current to zero.
Connection diagram
Derating Curve
FAQ
1.How many volts does it take to light a LED?
Answer: Some of the issues that may occur when a dimmer is incompatible with an LED lamp are: Flickering - Lamps will flicker (can also occur if a non-dimmable lamp is used) Drop-out - No light output at the end of the scale. ... Damage or failure - LED driver, circuit or LED is damaged or fails.
2.Do LEDS have a polarity?
Answer: Diode and LED Polarity. Diodes only allow current to flow in one direction, and they're always polarized. A diode has two terminals. The positive side is called the anode, and the negative one is called the cathode.
3.Do these(vt) buzz working with forward edge dimming?
Answer: Actually, we sugguest that our customers usel with forward edge triac dimmer for our 100-130vac VT series. And they work well with forward edge triac dimmer.
Most importantly, there is almost no any buzz during they work with forward edge triac dimmer.
4. What is a high power LED?
Answer:
--High power LEDs are one type of LED that has higher power and brightness and of course are more costly comparing to the small power LEDs.The regular LED rating current is 20mA,basically LED with rating current higher than 20mA can be called high power LED.
5. What is a LED driver used for?
An LED driver is an electrical device which regulates the power to an LED or a string (or strings) of LEDs. An LED driver responds to the changing needs of the LED, or LED circuit, by providing a constant quantity of power to the LED as its electrical properties change with temperature.
6. What is the main purpose of the led power supply?
However, most places supply higher voltage (120-277V), alternating current electricity. An LED driver's main purpose is to rectify higher voltage, alternating current to low voltage, direct current. LED drivers also protect LEDs from voltage or current fluctuations.