18v 2100mA triac dimmable constant current led driver power supply
SMT-020-2100CT is 2100ma led driver. It is 2100mA constant current triac dimmable led driver for Ushio led strip lighting. The output voltage range is 12-20V dc. The dimmable constant current led driver wattage is 42W. It has CE ETL FCC ROHS approved for EU and US markets.
Features of 2100ma led driver
·Output constant current
·Input range :100-130VAC / 170-265VAC
·Built-in PFC function, PF>0.9
·Efficiency > 85%
·Protections:Short circuit/over Voltage
·Fully isolated plastic case
·Easy installation
·Cooling by free air convection
·Work with leading edge and trailing edge TRIAC dimmers
·Strong compatibility, flicker-free dimming
·Suitable for LED lighting and moving sign applications
·Compliance to worldwide safety regulations for lighting
·CE,UL/cUL, RoHS approval
·5 years warranty
Specification of 2100ma led driver
Model |
SMT-120-0350CT |
SMT-020-2100CT |
SMT-025-1750CT |
SMT-050-0900CT |
|
Output |
DC Current |
350mA |
2100mA |
1750mA |
900mA |
|
Current Accuracy |
±5% |
|||
|
Voltage Range |
80-120V |
12-20V |
15-25V |
25-50V |
|
Rated power |
42W |
42W |
43W |
45W |
Input |
Voltage Range |
90-130VAC / 170~250VAC |
|||
|
Frequency Range |
47~63HZ |
|||
|
Power Factor (Typ.) |
PF≧0.93/110V ; PF≧0.95/220V ; PF≧0.94/250V |
|||
|
Full Load Efficiency(Typ.) |
>85% |
>85% |
>85% |
>85% |
|
AC Current(Typ.) |
0.14A/110VAC 0.12 A/220VAC 0.01A/250VAC |
|||
|
Leakage current |
<0.27mA/110VAC; ﹤0.25mA/220VAC |
|||
Protection |
Short Circuit |
Hiccup mode, recovers automatically after fault condition is removed. |
|||
|
Over voltage |
≦270VAC |
|||
Environment |
Working TEMP. |
-40~+60℃ |
|||
|
Working Humidity |
20~90%RH,non-condensing |
|||
|
Storage TEM.,Humidity |
-40~+80℃,10~95%RH |
|||
|
TEMP.coefficient |
±0.03%/℃(0~50℃) |
|||
|
Vibration |
10~500Hz,2G 10min./1 cycle,period for 60min.each along X,Y,Z axes |
|||
Safety&EMC |
Safety standards |
EN-60950-1, EN-61347-1-2 |
|||
|
Withstand voltage |
I/P-O/P:3.75KVAC |
|||
|
Isolation resistance |
I/P-O/P:100MΩ/500VDC/25℃/70%RH |
|||
|
EMC EMISSION |
Compliance toEN55015,EN61000-3-2 (≧50%load) |
|||
|
EMC IMMUNITY |
Compliance to EN55015,EN61000-4-2,3,4,5,6,8,11,A light industry level (surge4KV) |
|||
Others |
Weight |
0.34Kg/pcs |
|||
|
Size |
180*60*34mm(L*W*H) |
|||
|
packing |
324*298*176mm |
|||
Notes |
1. All parameters NOT specially mentioned are measured at 110V/230VAC input , rated load and 25℃of ambient temperature. 2. Ripple& noise are measured at 20MHz of bandwidth by using a 12”twisted pair-wire terminated with a 0.1uf &47uf parallel capacitor. 3. Tolerance:includes set us tolerance,line regulation and load regulation . |
FAQ
Why do you need a driver for LED lights?
LED drivers also protect LEDs from voltage or current fluctuations. A change in voltage could cause a change in the current being supplied to the LEDs. LED light output is proportional to its current supply, and LEDs are rated to operate within a certain current range (measured in amps).