Smarts ETL CE ROHS dali 1400mA led dimmable constant current power supply
35-57V 1400mA Dali dimmable constant current driver with better compatibility when it comes to LED downlights or floodlights. It is appropriate for dry and wet damp location that provide better experience.
Specification
|
Model |
SMT-090-0900CM |
SMT-080-1050CM |
SMT-057-1400CM |
SMT-038-2100CM |
|
|
Output |
DC Voltage |
50-90V |
45-80V |
35-57V |
20-38V |
|
Voltage Accuracy |
±0.5V |
||||
|
Rated current |
0～900mA |
0～1050mA |
0～1400mA |
0～2100mA |
|
|
Rated power |
80W |
84W |
80W |
79W |
|
|
Input |
Voltage Range |
100-265VAC |
|||
|
Frequency Range |
47～63HZ |
||||
|
Power Factor ( Typ.） |
PF≧0.92/120V /PF≧0.95/220V |
||||
|
Full Load Efficiency（Typ.） |
>87% |
>86% |
>85% |
>85% |
|
|
AC Current（Typ.） |
0.960A |
1.042A |
1.031A |
1.031A |
|
|
Leakage current |
﹤0.63mA/120VAC,﹤0.75mA/220VAC |
||||
|
Protection |
Short Circuit |
Protection type: Hiccup mode, recovers automatically after fault condition is removed |
|||
|
OverCurrent |
≦1.4*Iout |
||||
|
Over temperature |
100℃±10℃ shut down o/p voltage, re-power on to recover |
||||
|
Environment |
Working TEMP. |
-40～+50℃ |
|||
|
Working Humidity |
20～95%RH,non-condensing |
||||
|
Storage TEM.,Humidity |
-40～+80℃，10～95%RH |
||||
|
TEMP.coefficient |
±0.03%/℃（0～50℃） |
||||
|
Vibration |
10～500Hz，5G 12min./1 cycle，period for 72min.each along X,Y,Z axes |
||||
|
Safety & EMC |
Safety standards |
EN61347-1EN61347-2-13 IP67 |
|||
|
Withstand voltage |
I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC |
||||
|
Isolation resistance |
I/P-O/P I/P-FG O/P-FG：100MΩ/500VDC/25℃/70%RH |
||||
|
EMC EMISSION |
Compliance toEN55015,EN61000-3-2 (≧50%load) |
||||
|
EMC IMMUNITY |
Compliance to EN61000-4-2,3,4,5,6 ,11,EN61547,A light industry level（surge4KV） |
||||
|
Others |
Weight |
1Kg |
|||
|
Size |
210*69*45mm（L*W*H） |
||||
|
packing |
355*215*215mm/10pcs/CTN 220*70*50 mm for inner box |
||||
|
Notes |
1. All parameters NOT specially mentioned are measured at 220VAC input , rated load and 25℃of ambient temperature. Ripple& noise are measured at 20MHz of bandwidth by using a 12”twisted pair-wire terminated with a 0.1uf &47uf parallel capacitor. 2. Tolerance:includes set us tolerance,line regulation and load regulation . |
||||
 |
 |
 |
 |
Mechanical Specification
※Input Rubber cable H03VV-F 3G 1.0㎡，the green/yellow cable connect with (FG)，Brown with AC (L),Blue with AC(N)
※Input with Live Wire(L) Neutral Wire (N)
※Output LED SEC（LED+）,（LED-）
※Signal Dimming（DA1）, (DA2）DALI Non polar！
Dimming Operation
※Connect DALI signal cable of driver with DALI cable in Control then dim after controller scan and assign address
Derating Curve
※Load carried in accordance with the load derating curve, according to the ambient temperature derating, in order to extend the service life
Compatible Dimmer Type
With a long warranty up to 5 years and excellent product attributes, 1400mA dimmable constant current led driver dali can beperfect fidelity with LED floodlights. Its irradiation range can be adjusted at will when it matched with this power supply.
 
|
Related Products
|
|
Smarts 60W 500W led dimmable power supply owns the characteristics of waterproof and has a input range of 100-265VAC.
Mode：SMT-120-0500CM intput voltage：100~265VAC PF> 0.9 Efficiency >90% Size：200*68*45mm （L*W*H） Certification:CE,ETL ,FCC,RoHS 5 years warranty |
