UL certification 24v 96w triac & 0 10v dimmable constant voltage led driver for junction box
The new upgraded 5 in 1 dimmable led driver 96W is integrated with the junction box. It has a built-in voltage adjustment knob function. The PWM output and VR output modes can be switched through the rocker switch. It complies with global safety lighting regulations, UL certification, and is mainly sold in North America.
Specification
| Model | SMT-24096-VTD-J | SMT-36096-VTD-J | SMT-48096-VTD-J | |
| Certificate | UL / FCC / Class 2 / Class P / SELV / CE / RoHs / REACH | |||
| Output | DC Voltage | 24V | 36V | 48V |
| Fine tune voltage range | 24-26V adjust by knob | 36-38V adjust by knob | 48-50V adjust by knob | |
| Voltage Tolerance | ±0.5V | |||
| Voltage Regulation | ≤0.5% | |||
| Rated current | 4A | 2.67A | 2A | |
| Rated power | 96W | |||
| Load Regulation | ≤3% | |||
| Dimming Mode | PWM & VR two modes for choice ON for PWM mode while 1 for VR mode | |||
| Power off till three seconds, then power-on for mode switch | ||||
| Input | Voltage Range | 100-277VAC | ||
| Frequency Range | 47 - 63Hz | |||
| Power Factor@ full load | ≥0.95 | |||
| THD(Typ.) @ full load | ≤20%@full load | |||
| Efficiency @ full load | ≥88%@120VAC ≥91.5%@277VAC | ≥86%@120VAC ≥89.5%@277VAC | ≥87%@120VAC ≥90.5%@277VAC | |
| Standby power (Max.) | ≤0.5W | |||
| AC Current (Max.) | 1. 1A | |||
| Inrush Current (Typ.) | 51A, 208us@50%Ipeak @120VAC 118A, 452us@50%Ipeak @277VAC | |||
| Leakage current | <0.5mA | |||
| Protection | Short Circuit | Hiccup or Locking mode, recovers automatically after fault condition is removed | ||
| Over Load |
≤120%,>120% Constant current (limited power) mode, recovers automatically after fault condition is removed |
|||
| Over temperature | Shell surface temp.100℃±10℃ shut down o/p voltage, automatically recover after cooling | |||
| Environment | Working TEMP. | -40~+60℃ (see below derating curve) | ||
| Working Humidity | 20 - 95%RH non-condensing | |||
| Storage TEM.,Humidity | -40 - +80℃, 10 - 95% RH non-condensing | |||
| TEMP.coefficient | ±0.03%/℃(0 - 50℃) | |||
| Vibration | 10~500Hz, 5G 12min./1 cycle, period for 72min. each along X,Y,Z axes | |||
| Safety & EMC | Safety standards | UL8750 (US) | ||
| Withstand voltage | I/P-O/P:1.88KVAC I/P-FG:1.88KVAC O/P-FG:1.88KVAC (US) | |||
| Isolation resistance | I/P-O/P:100MΩ / 500VDC / 25℃ / 70% RH | |||
| EMC Emission | FCC Part 15, Subpart B (US) | |||
| lightning surge | L to L: 2KV L to G: 4KV | |||
| Stroboscopic | Strobe test standard | IEEE 1789 | ||
| Others | Net Weight | ** Kg | ||
| Dimension | 188*95.4*42.7mm (L*W*H) | |||
| Notes |
1. All parameters NOT specially mentioned are measured at 120VAC input,rated load and 25℃of ambient temperature 2. Tolerance: includes set up tolerance and load regulation . |
|||
|
|
 |
 |
 |
Mechanical Specification
1. Input UL1015 0.824mm²cable 3*18AWG, Black and White to be connected to AC (L) and (N), Green to be connected to (G).
2. Output UL1015 0.824mm² cable 2*18AWG, Red (+) to LED Positive side (+), Black (-) to LED Negative side (-).
3. Please make sure you connect these correctly otherwise your product will not function correctly and could be damaged.
Dimming Operation
Using two ways of dimming at the same time, you must be assured that LED lighting is up to the max. Brightness then you could operate with the other dimming;
Using one dimming ---TRIAC/Phase cut dimming
1. The Pulse-Width Modulation (PWM) of output voltage can be adjusted through input terminal of the AC phase line(L) by connection a phase /Triac dimmer or lighting system.
2. Working with Forward phase, MLV and Reverse phase, ELV, TRIAC dimmers or light system.
3. Min. loading is about 10%
4. Please try to use dimmers with power at least 2 times as the output power of the driver.
Using one dimming ---0-10/ 1-10V/ 10V PWM/ Potentiometer dimming
Related Products
|
This 5 in 1 dimmable led driver 96W has an aluminum housing design, waterproof rating ip67, and good heat dissipation. It is suitable for outdoor led dimming lighting project installation and use. It has a 7-year warranty
Model: SMT-012-100VTD Input Voltage: 100-277vac
Dimming Mode: 5 IN 1
|
