12 volt 2.5a 30w constant voltage power supply for led lights
Switching power supply may be added in parallel across the output of the led driver until the maximum output current is reached.and could be match flood light,module,strip light,downlight with aluminum outercase IP67 could be used in indoor and ourdoor location.
Feature |
|
● IP67 design for indoor or outdoor installations ● Protections:Short circuit/Overload/Over temperature ● Cooling by free air convection ● 100% full load burn-in test ● Suitable for LED lighting ● Slim shape, compact size ● 2 years warranty |
Specification
SPECIFICAION | |||||
MODEL | SMT-012-030VN | SMT-024-030VN | |||
OUTPUT | DC VOLTAGE | 12V | 24V | ||
RATED CURRENT | 2.5A | 1.25A | |||
CURRENT RANGE | 0~2.5A | 0~1.25A | |||
RATED POWER | 24W | 24W | |||
RIPPLE&NOISE(max) | <240mV | <240mV | |||
voltage TOLERANCE | 12V±5% | 24V±5% | |||
VOLTAGE TOLERANCE | ±0.5V | ±0.5V | |||
SETUP RISE TIME | 80ms/110VAC | 80ms/110VAC | |||
HOLD UP TIME(Typ.) | 60ms/110VAC | 60ms/110VAC | |||
INPUT | VOLTAGE RANGE | 100~265Vac | 100~265Vac | ||
FREQUENCY RANGE | 50~60Hz | 50~60Hz | |||
POWER FACTOR(Typ.) | no PFC | no PFC | |||
EFFICIENCY(Typ.) | ﹥83% | ﹥84% | |||
AC CURRENT(Typ.) | 0.35A/220V | 0.5A/220V | |||
INRUSH CURRENT (Typ.) | COLD START 30A/110~220VAC | ||||
PROTECTION | Short circuit | Protection type:recovers automatically after condition is removed | |||
Overload | overload protected@130-150% above peak rating | ||||
Over temperature | Protection type:Shut down o/p voltage,re-power on to removed | ||||
ENVIRONMENT | WORKING TEMP. | -30~+50℃ (Refer to output load derating curve) | |||
WORKING HUMIDITY | 20~99% RH non-condensing(Waterproof) | ||||
STORAGE TEMP.,HUMIDITY | -40~+80℃,10~99%RH | ||||
SAFETY&EMC | SAFETY STANDARDS | EN61347-1;EN61347-2-13;SELV;IP67 approved | |||
WITHSTAND VOLTAGE | I/P-O/P:2KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC | ||||
EMC Test Standards | |||||
NOTE |
1.All parameters NOT specially mentoned are measured at 220VAC input,rated load and 25℃ of ambient temperature. 2.Ripple&noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf&10uf parallel capacitor. 3.Tolerance:includes set up tolerance,line regulation and load regulation. |
||||
Label |
|
Dimension
Compatible LED light type
This waterproof led driver 30W is input 100-265vac, 40-63hz output 12vdc / 24vdc led lighting driver, Can improve the working efficiency of LEDFLEX LumenLine neon LED strip lights, and extend the life of neon lights
Related Products
75W DC led power supply 12v is phase cut dimmable led drivers for using in indoor dry locations.
Model:SMT-012-075VTHWH input voltage:170-265V AC Efficiency > 86% PFC:93% Size: 180*60*35mm(L*W*H) Weight:0.5Kg/pcs |
|
Power supply 36w 12vdc, input 200-240vac, SAA for AU market. CE, ROHS for EU market.
Mode:SMT-012-036VTSPH Dimming Mode : triac dimming Size:260*30*18.5mm(L*W*H) Weight: 0.40Kg/pcs
Dimming range:0-100% Certification: SAA,CE, ROHS
Inrush Current (Typ.): 20A, 50%, 1.6ms |