120v 277v 12v 24v 60w 96w 150w triac dimmable led driver
For your convenience, every type of led power supply 60w is available as part of an LED strip light Kit. Each comes complete with a reel of LED strip from 1-metre to 5-metres in length, a dedicated 12 volt, Plug ‘n’ Play Power Supply and, in the case of the addressable LED strip lights, a compatible triac dimmer.
Specification
|
model |
SMT-012-060VTH (1.0 version) SMT-012-060VTHV2 (2.0 version) |
SMT-024-060VTH (1.0 version) SMT-024-060VTHV2 (2.0 version) |
|
|
Output |
DC Voltage |
12V |
24V |
|
Rated Current |
5A |
2.5A |
|
|
Rated Power |
60W |
||
|
Voltage Tolerance |
±0.5V |
||
|
Voltage Regulation |
±0.5% |
||
|
Load Regulation |
±1% ±1% |
||
|
Input
|
Voltage Range |
100-277VAC |
|
|
Frequency Range |
47-63HZ |
||
|
Power Factor(Typ.)@ full load |
0.98@120VAC 0.95@277VAC |
0.98@120VAC 0.95@277VAC |
|
|
THD（Typ.）@ full load |
<20% |
||
|
Efficiency(Typ.)@ full load |
83% |
83% |
|
|
AC Current（Max.） |
0.9A@100VAC |
||
|
Inrush Current （Typ.） |
14A, 50%, 780us |
||
|
Leakage current |
<0.50mA |
||
|
protection |
Short Circuit |
shut down o/p voltage, re-power on to recover after fault condition removed |
|
|
Over Loading |
≤120% Hiccup mode,recovers automatically after fault condition is removed |
||
|
Over temperature |
100℃±10℃ shut down o/p voltage, automatically recover after cooling. |
||
|
Environment |
Working TEMP. |
-40～+60℃ (see below derating curve) |
|
|
Working Humidity |
20～90%RH, non-condensing |
||
|
Storage TEMP. Humidity |
-40～+80℃，10～95%RH |
||
|
TEMP .coefficient |
±0.03%/℃（0～50℃） |
||
|
Vibration |
10～500Hz, 5G 10min./1 cycle,period for 60min. each along X,Y,Z axes |
||
|
Safety& EMC |
Safety standards |
UL8750+UL1310 |
|
|
Withstand voltage |
I/P-O/P:3.75KVAC |
||
|
Isolation resistance |
I/P-O/P:100MΩ/500VDC/25℃/70%RH |
||
|
EMC EMISSION |
FCC Part 15 B |
||
|
Others |
Weight |
About 1.1Kg |
|
|
Size |
1.0 version: 188*92*26mm(L*W*H); 2.0 version: 188*94.5*40mm(L*W*H) |
||
|
packing |
10PCS/CTN（L*W*H） |
||
|
Notes |
1. All parameters if NOT specially mentioned are measured at 120VAC input , rated load and 25℃of ambient temperature. 2. To extend the driver's using life ,please reduce the loading at lower input voltage. |
||
Mechanical Specification
l Input wire 18AWG Black and White to be connected to AC L and N ,Green wire go ground,
l Output wire 18AWG Red to LED Positive side (+) , Black to LED Negative side (-).
Compatible with LED strip lights Type
You’ll no doubt have seen LEDs everywhere, but you might not know everything about these clever little lights and why they’re so popular. This guide is your one-stop resource for all things LED lights, so read on to find out more about the pros and cons of LED lights.
Related Products
|
|
The 120w led driver is wifi dimmable led driver for your RGBW led lighting project, they are intelligent and easy installation for your project.
Mode：SMT-W-12120-4C-A intput voltage：100~277V AC Efficiency > 88% Size：200*70*43mm （L*W*H） Weight：1.2 Kg/pcs |
|
|
