200-240VAC ultra thin size triac & 0 10v dimmable led driver power supply 36W 12 volt dc
This constant voltage triac & 0 10v dimmable led power supply has strong compatibility. The dimming range is between 0~100%. It has ultra-low load requirements and can work perfectly at 10-100% load. It has a 7-year warranty
Specification
| model | SMT-012-036VTDSPH | SMT-024-036VTDSPH | |
| Output | DC Voltage | 12VDC | 24VDC |
| Voltage Tolerance | ±0.5 | ||
| Rated current | 3.0Amp | 1.5Amp | |
| Rated power | 36W | 36W | |
| Voltage Regulation | ±0.5% | ||
| Load Regulation | ±1% | ||
| Input | Voltage Range | 200-240VAC | |
| Frequency Range | 47~63HZ | ||
| Power Factor ( Typ.) | PF≥0.96/230VAC | ||
| Full Load Efficiency(Typ.) | 80% | 79% | |
| THD(Typ. ) @ full load | < 20% | ||
| AC Current(Typ.) | 0.3A | ||
| Inrush Current(Typ.) | 40.8A,50%,102us | ||
| Leakage current | <0.5mA | ||
| Protection | Short Circuit | Hiccup mode,recovers automatically after fault condition is removed | |
| Over Loading | ≤120% Hiccup mode,recovers automatically after fault condition is removed | ||
| Over temperature | 100℃±10℃ | ||
| Protection Class | II | ||
| Environment | Working TEMP. | -40~+60℃ (see below derating curve) | |
| Working Humidity | 20 - 95%RH,non-condensing | ||
| Storage TEM.,Humidity | -40 - +80℃,10 - 95%RH | ||
| TEMP.coefficient | ±0.03%/℃(0 - 50℃) | ||
| Vibration | 10~500Hz,2G10min./1 cycle,period for 60min.each along X,Y,Z axes | ||
| Safety&EMC | Safety standards | EN61347-1 EN61347-2-13 EN62493 | |
| Withstand voltage | I/P-O/P:3.75KVAC | ||
| Isolation resistance | I/P-O/P: 100MΩ/500VDC/25℃/70%RH | ||
| EMC EMISSION | EN55015 EN61000-3-2 EN61000-3-3 | ||
| EMC IMMUNITY | EN61000-4-2,3,4,5,6,11 EN61547 | ||
| Others | Weight | 0.2Kg | |
| Size | 260*30*18.5mm(L*W*H) | ||
| packing | 330*275*130mm/ 50pcs /CTN G.W.: 11KG/CTN | ||
| Notes | 1. All parameters NOT specially mentioned are measured at 230VAC input , rated load and 25℃of ambient temperature. | ||
| 2. Tolerance: includes set up tolerance, line regulation and load regulation . | |||
| 3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again. | |||
 |
 |
 |
 |
Mechanical Specification
Dimming Operation
The Pulse-Width Modulation (PWM) of output voltage can be adjusted through input terminal of the AC phase line(L) by connection a phase /Triac dimmer of lighting system.
Matching with leading edge and trailing edge Triac dimmer or lighting system.
Please try to use dimmers with power at least 1.5 times as the output power of the driver.
Related Products
|
36W 12V 5 in 1 dimmable led driver Aluminum housing design High waterproof grade ip67. Good heat dissipation. Suitable for installation and use of outdoor small space led lighting projects. Such as advertising light box lighting projects.
Model: SMT-012-030VTDSW Input Voltage: 100-277vac
Dimming Mode: TRIAC & 0 10V Dimmable
|
