IP67 12VDC 100watt constant voltage led driver
Each output lead for 12 volt LED waterproof transformer is pulling from the same source, for example a 150 Watt supply with two leads can still only give a total of 150 Watts whether you use one or both output leads,with litom LED bulbs C-M237 Solar Spotlights Pro(30 LED) can save power to the greatest extent
Features
· IP67 design for indoor or outdoor installations
· Cooling by free air convection
·Protections:Short circuit/Overload/Over temperature
·100% full load burn-in test
·Cooling by free air convection
·Slim shape, compact size
·2 years warranty
Specification sheet
SPECIFICAION
MODEL
SMT-012-150VN
SMT-024-150VN
OUTPUT
DC VOLTAGE
12V
24V
RATED CURRENT
12.5A
6.25A
CURRENT RANGE
0~12.5A
0~6.25A
RATED POWER
150W
150W
RIPPLE&NOISE(max)
150mV
150mV
VOLTAGE TOLERANCE
±0.5V
±0.5V
SETUP RISE TIME
80ms/220VAC
HOLD UP TIME(Typ.)
60ms/220VAC
INPUT
VOLTAGE RANGE
170~265VAC
FREQUENCY RANGE
50~60Hz
POWER FACTOR(Typ.)
EFFICIENCY(Typ.)
﹥83%
AC CURRENT(Typ.)
1.22A/220VAC
1.20A/220VAC
INRUSH CURRENT (Typ.)
COLD START 50A/220VAC
PROTECTION
Short circuit
Protection type:recovers automatically after condition is removed
Overload
12.5-15.5A
6.25-7.75A
Over temperature
Protection type:Shut down o/p voltage,re-power on to removed
ENVIRONMENT
WORKING TEMP.
-30~+55℃ (Refer to output load derating curve)
WORKING HUMIDITY
20~99% RH non-condensing(Waterproof)
STORAGE TEMP.,HUMIDITY
-40~+80℃,10~99%RH
SAFETY&EMC
SAFETY STANDARDS
EN61347-1;EN61347-2-13;SELV;IP67 approved
WITHSTAND VOLTAGE
I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
EMC Test Standards
NOTE
1.All parameters NOT specially mentoned are measured at 220VAC input,rated load and 25℃ of ambient temperature.
2.Ripple&noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf&10uf parallel
capacitor.
3.Tolerance:includes set up tolerance,line regulation and load regulation.
Label
Derating Curve
Mechanical Specification
FAQ
1.What is the wire gauge that fits into the ETL Triac Dimmable LED Driver?
Answer: 14-26 AWG
2.What is the difference between the 20w/45w UL and 24w/48w ETL model?
Answer:
-- when you install a 20w/45w UL led driver in your led light you should consider abbot min. 55% load limtation. If it less than 55%, the led light will have flick problem. But the 20w/45w ETL model is no load limitation. You can load it in the led light 1-48w.
-- the height of 24w(20mm)/48w(24mm) is lower than 20w(28mm)/45w(34mm).
3.If the connection load less than 55% for the load limitation led driver, what will happen?
Answer: If you take our 1.0V triac dimmable led drivers, the led light will have flick problem
4.Can we make our company information on the label?
Answer:
--As per the policy of ETL/UL, we can not make changes on the labels at liberty. If we make changes as your requirement , then our company will be punished if the ETL/UL department discover it . Really sorry for that and caused you so much trouble..
--If making changes on the labels are necessary for your company, I suggest you multi-list of our ETL/UL certification , then we can help you design the new label as requested.What is your opinion?
5. Do you have MOQ?
--We don't have MOQ, we welcome your trial/small order.
6. Does your company have any Triac dimmers recommendation for European market?
1） Busch-2250UGIRA-030200
2） Berker-2875GUNG266GDECLIPSAL (奇胜前沿、后沿）: 32E450LM-TM 32E450L-T
C2032E450L-T SC2032E450L-T SL2032E450L-T
P2032E450LM-TM P2032E450L-T 1920E450L
3） CLIPSAL
4） Lutron (220VAC types)
7. Which payment terms you can accept?
We accept T/T, Western Union, Money Gram, Paypal, etc.
8. How about your delivery time?
3-7 working days according the order quantities.
