277vac 12v/24v 120w led driver switching power supply 0-10v dimming super bright leds lighting EGD-Cx-CxJBK
Smarts 12v/24v 120w led driver switching power supply is waterproof rete IP67 and for indoor and outdoor use. It's 0-10v/pwm dimming could drive super bright leds lighting EGD-Cx-CxJBK from 0-100% dimming range,without flicker.
Specification
Model |
SMT-012-120VDHW |
SMT-024-120VDHW |
|
Output |
DC Voltage |
12V |
24V |
Voltage Accuracy |
±0.5V |
||
Rated current |
0-10.0A |
0-5.0A |
|
Rated power |
120W 120W |
||
Ripple&noise Max. |
250mVp-p 400mVp-p |
||
Input |
Voltage Range |
100-277VAC
|
|
Frequency Range |
47~63HZ |
||
Power Factor ( Typ.) |
>0.90@110V,277V |
||
Full Load Efficiency(Typ.) |
87% >88% 88% |
||
AC Current(Typ.) |
1.263A/120VAC 0.891A/170VAC 0.689A/220VAC 0.572A/277VAC |
||
Leakage current |
﹤0.25mA/110V,277VAC |
||
Protection |
Short Circuit |
Protection type: Hiccup mode, recovers automatically after fault condition is removed |
|
Over voltage |
≦325VAC |
||
Over temperature |
100℃±10℃ shut down o/p voltage, re-power on to recover |
||
Environment |
Working TEMP. |
-40~+60℃ |
|
Working Humidity |
20~95%RH,non-condensing |
||
Storage TEM.,Humidity |
-40~+80℃,10~95%RH |
||
TEMP.coefficient |
±0.03%/℃(0~50℃) |
||
Vibration |
10~500Hz,5G 12min./1 cycle,period for 72min.each along X,Y,Z axes |
||
Safety& EMC |
Safety standards |
Class P, Type HL, EN61347-1 EN61347-2-13 IP67 |
|
Withstand voltage |
I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC |
||
Isolation resistance |
I/P-O/P I/P-FG O/P-FG:100MΩ/500VDC/25℃/70%RH |
||
EMC EMISSION |
Compliance to EN55015,EN61000-3-2 (≧50%Load) |
||
EMC IMMUNITY |
Compliance to EN61000-4-2,3,4,5,6,8,11,EN61547,Alight industry level (surge4KV) |
||
Others |
Weight |
1.32Kg |
|
Size |
240*66*53mm(L*W*H) |
||
packing |
329*279*176mm/10pcs |
||
Notes |
1. All parameters NOT specially mentioned are measured at 110~277VAC input , rated load and 25℃of ambient temperature. 2. Ripple& noise are measured at 20MHz of bandwidth by using a 12”twisted pair-wire terminated with a 0.1uf &47uf parallel capacitor. 3. Tolerance:includes set us tolerance,line regulation and load regulation . |
Mechanical Specification
※Input 18AWG*3C,the green/yellow cable connect with (FG),Brown with AC (L),Blue with AC(N)
※Signal 18AWG*2C,Red is(DIM+),Black is(DIM-)
※Output 18AWG*2C,Blown is output(V+),Blue is output(V-)
Derating Curve
Compatible Dimmer Type
SMARTS' SMT-012-120VDHW 0-10v dimming 120w led driver switching power supply with super bright leds F019-W dimmer, it can achieve smooth dimming effect.
Related Products
|
0-10v dimmable 10-25vdc 700ma 17.5watt 0-10v led driver for indoor use Mode:SMT-025-0700CD intput voltage:100~265VAC waterproof rate:IP20 plastic case working mode: constant current Size: 140*45*28mm (L*W*H) 5 years warranty |