CE ROHS SAA listed 12v 60w dimmable led driver
At Smarts LED we like to think of 12v 60w dimmable led driver as mood lighting for use in the home as well as in commercial business environments.
Specification
|
model |
SMT-012-060VTDSPH |
SMT-024-060VTDSPH |
||
|
Output |
DC Voltage |
12VDC |
24VDC |
|
|
Voltage Tolerance |
±0.5 |
|||
|
Rated current |
5.0Amp |
2.5Amp |
||
|
Rated power |
60W |
60W |
||
|
Voltage Regulation |
±0.5% |
|||
|
Load Regulation |
±2% ±1% |
|||
|
Input |
Voltage Range |
200-240VAC |
||
|
Frequency Range |
47 - 63Hz |
|||
|
Power Factor ( Typ.） |
PF≥0.96/230VAC |
|||
|
THD(Typ. ) @ full load |
<20% |
|||
|
Full Load Efficiency |
83% |
86% |
||
|
AC Current（Typ.） |
0.5A |
|||
|
Inrush Current（Typ.） |
57.6A,50%,128us |
|||
|
Leakage current |
<0.5mA |
|||
|
Protection |
Short Circuit |
shut down o/p voltage, re-power on to recover after fault condition is removed |
||
|
Over Loading |
≤120% Hiccup mode,recovers automatically after fault condition is removed |
|||
|
Over temperature |
100℃±10℃ |
|||
|
|
II |
|||
|
Environment |
Working TEMP. |
-40~+60℃ (see below derating curve) |
||
|
Working Humidity |
20 - 95%RH,non-condensing |
|||
|
Storage TEM.,Humidity |
-40 - +80℃,10 - 95%RH |
|||
|
TEMP.coefficient |
±0.03%/℃(0 - 50℃) |
|||
|
Vibration |
10～500Hz, 2G 10min./1 cycle,period for 60min. each along X,Y,Z axes |
|||
|
Safety&EMC |
Safety standards |
EN61347-1 EN61347-2-13 EN62493 |
||
|
Withstand voltage |
I/P-O/P:3.75KVAC |
|||
|
Isolation resistance |
I/P-O/P : 100MΩ/500VDC/25℃/70%RH |
|||
|
EMC EMISSION |
EN55015 EN61000-3-2 EN61000-3-3 |
|||
|
EMC IMMUNITY |
EN61000-4-2,3,4,5,6,11 EN61547 |
|||
|
Others |
Weight |
0.3Kg |
||
|
Size |
300*30*18.5mm(L*W*H) |
|||
|
packing |
330*330*130mm/ 50pcs /CTN G.W.: 16KG/CTN |
|||
|
Notes |
1. All parameters NOT specially mentioned are measured at 230VAC input , rated load and 25℃of ambient temperature. 2. Tolerance: includes set up tolerance, line regulation and load regulation . 3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again. |
|||
 |
 |
 |
 |
Mechanical Specification
Input terminals: (L) and (N) to connect to L and N of Mains AC
Output terminals: LED (+) to LED Positive side (+) , LED (-) to LED Negative side (-).
Dimming Terminal: DIM (+) to 0/1-10V dimmer signal(+ ),DIM (-) to 0/1-10V dimmer signal(-)
Please DO NOT connect “DIM-“ to “LED-“, “DIM+” to “ LED+” ,or other incorrect connection.
Please make sure your connect these correctly otherwise your product will not function correctly and could be damaged.
Connection diagram ani
S
p
ecification
Mecnical Specification
Compatible with LED strip Type
In the commercial environment, strip lighting with dimmable led driver is often used in reception areas and boardrooms and is very popular in the hospitality industry, found in many Restaurants, Hotels, Clubs and Pubs used for colour washing walls, for lighting hallways and staircases, external edge lighting, to create an atmosphere.
Related Products
|
The 24vdc 200w triac+0-10v dimmable led driver is widely used in the universal using. To decrease your inventory pressure, it would be better for using this items for your led lighting project.
Mode：SMT-024-200VTDHV2 intput voltage：100~277V AC Efficiency > 98% Size：260*125*45mm （L*W*H） Weight：1.8 Kg/pcs |
|
|
