UL Waterproof 0-10v dimmable 300watt class 2 led driver 12v 24v
Dimming by 0-10v, this 300watt led driver is UL cUL approval. Compared with led drive other option without junction box, SMT-012-300VDHJWV2 is more secure. EatonDF10P-C1 dimmer is one of the recommended model.
Specification
|
Model |
SMT-012-300VDHJ (1.0 version) SMT-012-300VDHJWV2 (2.0/3.0 ver.) |
SMT-024-288VDHJ(1.0 version) SMT-024-288VDHJWV2 (2.0/3.0 ver.) |
||
|
Output |
DC Voltage |
12VDC |
24VDC |
|
|
Voltage Tolerance |
±0.5V |
|||
|
Voltage Regulation |
±0.5% |
|||
|
Load Regulation |
±1% |
±1% |
||
|
Rated current |
5*5A |
3*4A |
||
|
Rated power |
300W |
288W |
||
|
Input |
Voltage Range |
100-277VAC |
||
|
Frequency Range |
47-63Hz |
|||
|
Power Factor(Typ.)@ full load |
0.99@120VAC 0.95@277VAC |
0.99@120VAC 0.95@277VAC |
||
|
THD（Typ.）@ full load |
<20% |
<20% |
||
|
Efficiency(Typ.)@ full load |
87%@120V 91%@277VAC 79% |
85%@120V 90%@277VAC
|
||
|
AC Current（Max.） |
3.4A@100VAC |
3.6A@100VAC |
||
|
Inrush Current（Typ.） |
35A ,50%,960us @120VAC ; 43A,50%,1ms@277VAC 12.4A (twidth=430us) @277VAC |
|||
|
Leakage current |
<0.50mA |
|||
|
Protection |
Short Circuit |
shut down o/p voltage, re-power on to recover afterfault conditionisremoved |
||
|
Over Loading |
≤120% Hiccup mode ,recovers automatically after fault condition is removed |
|||
|
Over temperature |
100℃±10℃ shut down o/p voltage,automatically recover after cooling. |
|||
|
Environment |
Working TEMP. |
-40～+60℃ (see below derating curve) |
||
|
Working Humidity |
20～90%RH, non-condensing |
|||
|
Storage TEMP. Humidity |
-40～+80℃，10～95%RH |
|||
|
TEMP .coefficient |
±0.03%/℃（0～50℃） |
|||
|
Vibration |
10～500Hz, 5G 10min./1 cycle,period for 60min. each along X,Y,Z axes |
|||
|
Safety&EMC |
Safety standards |
UL8750+UL1310 |
||
|
Withstand voltage |
I/P-O/P:1.88KVAC |
|||
|
Isolation resistance |
I/P-O/P:100MΩ/500VDC/25℃/70%RH |
|||
|
EMC EMISSION |
FCC 47 CFR Part 15 ,Subpart B |
|||
|
Others |
Weight |
2.2Kg(1.0 version) |
||
|
Size |
1.0 version: 301*108*46mm (L*W*H) 2.0 version: 301*140*45mm (L*W*H) / 3.0 ver.: 301*110*45mm(L*W*H) |
|||
|
packaging |
Carton:365*250*245mm, Packaging: 10pcs /CTN G.W.:26.6KG/CTN |
|||
|
Notes |
1. All parameters if NOT specially mentioned are measured at 120VAC input , rated load and 25℃of ambient temperature. 2. To extend the driver's using life ,please reduce the loading at lower input voltage. |
|||
 |
 |
 |
 |
Mechanical Specification
SMT-012-300VDHJ(1.0 version)
SMT-024-288VDHJ(1.0 version)
(Used in dry, damp location)
SMT-012-300VDHJWV2
SMT-024-288VDHJWV2
(Used in dry, damp & wet location)
Ø Input wire 18AWG Black and White to be connected to AC L and N ,Green wire go ground,
Ø Output cable 2*16AWG,Red" (+) to LED Positive side (+) , "Black"(-) to LED Negative side (-).
Ø Three groups output cables. of SMT-012-3000VDHJ and two groups of SMT-024-288VDHJ
Ø Dimming cable 2*18AWG,DIM (+) Purple to 0/1-10V dimmer signal(+ ),DIM (-) Grey to 0/1-10V dimmer signal (-)
Ø Please DO NOT connect “DIM-“ to “LED-“, “DIM+” to “ LED+” ,or other incorrect connection.
Ø Please make sure your connect these correctly otherwise your product will not function correctly and could be damaged.
Dimming Operation
Ø Built-in 4 in 1 dimming function, IP20 /IP67 rated .Output constant current level can be adjusted through output cable by connection a resistance or 1-10V DC or 10V PWM signal between DIM+ and DIM-
Ø Reference resistance value for output current adjustment (Typical)
|
Resistance value |
Signal driver |
0Ω |
10KΩ |
20KΩ |
30KΩ |
40KΩ |
50KΩ |
60KΩ |
70KΩ |
80KΩ |
90KΩ |
100KΩ |
OPEN |
|
Multiple drivers |
0Ω/N |
10KΩ/N |
20KΩ/N |
30KΩ/N |
40KΩ/N |
50KΩ/N |
60KΩ/N |
70KΩ/N |
80KΩ/N |
90KΩ/N |
100KΩ/N |
—— |
|
|
Percentage of rated current |
0% |
10% |
20% |
30% |
40% |
50% |
60% |
70% |
80% |
90% |
100% |
102％-108％ |
|
Ø 1-10/0-10V dimmable function for output current adjustment(Typical)
|
Dimming value |
0V |
1V |
2V |
3V |
4V |
5V |
6V |
7V |
8V |
9V |
10V |
OPEN |
|
Percentage of rated current |
0% |
10% |
20% |
30% |
40% |
50% |
60% |
70% |
80% |
90% |
100% |
102％-108％ |
Ø 10V PWM signal for output current adjustment (Typical): Frequency range:100Hz-3KHZ
|
Duty value |
0% |
10% |
20% |
30% |
40% |
50% |
60% |
70% |
80% |
90% |
100% |
OPEN |
|
Percentage of rated current |
0% |
10% |
20% |
30% |
40% |
50% |
60% |
70% |
80% |
90% |
100% |
102％-108％ |
Derating Curve
Ø Load carried in accordance with the load derating curve, according to the ambient temperature derating, in order to extend the working life.
0/1-10V / Potentiometer / 10V PWM (3 in 1) Dimmable LED Driver connecting solution
Diagram 1 as below:
Diagram 2 as below:
Instruction
Ø This driver should be installed by qualified and professional person;
Ø Please make sure the driver is installed with adequate ventilation around it to allow for heat dissipation.
Ø Ensure that wiring is correct before test in order to avoid light and power supply damage;
Ø If the dimmable LED drivers do not work normally, pl. don’t maintain privately, but contact us: sales9@smartselectronics.com Or take a phonecall: 0086 18016688251
Our official website: www.smarts-electronics.com & www.swinpower.com
Compatible Dimmer Type
As a waterproof 300watt led power supply, the installation position is more flexible. Seven years quality assurance is provided.Most constant voltage 12v 24v led lights can be workable, such as Nilight LED Light Bar 600537014688.
|
|
Related Products
|
SMT-012-060VDHV2 is a Class P, type HL. The output power is 60 watt.
Mode：SMT-012-060VDHV2 intput voltage：100~277V AC Working Mode:constant voltage Size：188*94.5*40mm(L*W*H) Certification:CE,UL, RoHS,FCC |
