0-10v dimmable class 2 led transformer AQ Lighting Pendant Light AQ-PS7586
Smarts 12v 180w 0-10v dimming led driver is a constant voltage class 2 led transformer, it's 3*5A output current could application with led strip. SMT-012-180VDHJ with AQ Lighting Pendant Light AQ-PS7586 can save power to the greatest extent.
Specification
Model
SMT-012-180VDHJ (1.0 version)
SMT-012-180VDHJWV2 (2.0/3.0 ver.)
SMT-024-192VDHJ (1.0 version)
SMT-024-192VDHJWV2 (2.0/3.0 ver.)
Output
DC Voltage
12V
24V
Voltage Tolerance
±0.5V
Voltage Regulation
±0.5%
Load Regulation
±2%
±1%
±1%
Rated current
3*5A
2*4A
Rated power
180W
192W
Input
Voltage Range
100-277VAC
Frequency Range
47-63Hz
Power Factor(Typ.)@full load
0.99@120VAC 0.94@277VAC
0.99@120VAC 0.94@277VAC
THD(Typ.)@ full load
<20%
<20%
Efficiency(Typ.)@ full load
86%@120V 88%@277VAC
79%
87%@120V 89%@277VAC
AC Current(Max.)
2.2A@100VAC
2.3A@100VAC
Inrush Current (Typ.)
19A ,50%,1.3ms @120VAC ; 38A,50%,960us @277VAC
12.4A (twidth=430us) @277VAC
Leakage current
<0.50mA
Protection
Short Circuit
shut down o/p voltage, re-power on to recover after fault condition is removed
Over Loading
≤120% Hiccup mode ,recovers automatically after fault condition is removed
Over temperature
100℃±10℃ shut down o/p voltage, automatically recover after cooling.
Environment
Working TEMP.
-40~+60℃ (see below derating curve)
Working Humidity
20~90%RH, non-condensing
Storage TEMP. Humidity
-40~+80℃,10~95%RH
TEMP .coefficient
±0.03%/℃(0~50℃)
Vibration
10~500Hz, 5G 10min./1 cycle,period for 60min. each along X,Y,Z axes
Safety&EMC
Safety standards
UL8750+UL1310
Withstand voltage
I/P-O/P:1.88KVAC
Isolation resistance
I/P-O/P:100MΩ/500VDC/25℃/70%RH
EMC EMISSION
FCC 47 CFR Part 15 ,Subpart B
Others
Weight
2.2Kg (1.0 version)
Size
1.0 version: 278*108*46mm (L*W*H)
2.0 version: 278*110*45mm (L*W*H) / 3.0 ver.: 278*130*45mm (L*W*H)
packaging
Carton size: 340*250*245mm / 10pcs /CTN G.W.:24.80KG/CTN
Notes
1. All parameters NOT specially mentioned are measured at 110V/277VAC input , rated load and 25℃of ambient temperature.
2. Ripple& noise are measured at 20MHz of bandwidth by using a 12”twisted pair-wire terminated with a 0.1uf &47uf parallel capacitor.
3. Tolerance:includes set us tolerance,line regulation and load regulation .
Mechanical Specification
Ø Input wire 18AWG Black and White to be connected to AC L and N ,Green wire go ground,
Ø Output cable 2*16AWG,Red" (+) to LED Positive side (+) , "Black"(-) to LED Negative side (-).
Ø Three groups output cables. of 12V 180W and two groups of 24V 192W
Ø Dimming cable 2*18AWG,DIM (+) Purple to 0/1-10V dimmer signal(+ ),DIM (-) Grey to 0/1-10V dimmer signal (-)
Ø Please DO NOT connect “DIM-“ to “LED-“, “DIM+” to “ LED+” ,or other incorrect connection.
Ø Please make sure your connect these correctly otherwise your product will not function correctly and could be damaged.
Derating Curve
Ø Load carried in accordance with the load derating curve, according to the ambient temperature derating, in order to extend the working life.
0/1-10V / Potentiometer / 10V PWM (3 in 1) Dimmable LED Driver connecting solution:
Compatible Dimmer Type
120v led drivers with 0-10v dimming could has strong compatibility and can be compatible with multiple brands of lights. For example: AQ Lighting Industrial Metal Pendant TM-7779.
Related Products
|
12V 20W 0-10V dimmable led driver could driver your 12v 1-20w led strip, 5 years warranty for indoor use Mode:SMT-012-020VD intput voltage:100~130VAC/180-265VAC
IP20 Plastic case
dimming mode: 0-10v dimmable working mode: constant voltage Size: 140*45*28mm (L*W*H) 5 years warranty |