120v to 12v dc 60w Diode LED class 2 led power supply DI-DM-MW12V60W-0-10V-LPS
Smarts SMT-012-060VDHW is 277vac 12v 60w class 2 led power supply, they are designed to be highly efficient >88% and highly PF>0.9, could provide you 7 year warranty,it's 2 years warranty longer than Diode LED class 2 led power supply DI-DM-MW12V60W-0-10V-LPS.
Specification
model |
SMT-012-060VDHW |
SMT-024-060VDHW |
|
Output |
DC Voltage |
12V |
24V |
Voltage Accuracy |
±0.5V |
±0.5V |
|
Voltage Regulation |
±0.5% |
||
Rated current |
5.00A |
2.50A |
|
Load Regulation |
±1%
|
||
Rated power |
60W |
60W |
|
Input |
Voltage Range |
100-277V AC |
|
Frequency Range |
47~63HZ |
||
Power Factor ( Typ.) |
0.98@120VAC 0.98@277VAC |
0.98@120VAC 0.98@277VAC |
|
|
Full Load Efficiency(Typ.) |
>88% |
>89% |
AC Current(Typ.) |
0.9A/110VAC / 0.64A/277VAC |
||
Inrush Current (Typ.) |
14A, 50%, 780us |
||
Leakage current |
<0.50mA |
||
Over temperature |
100℃±10℃ shut down o/p voltage, automatically recover after cooling.
|
||
Short Circuit |
shut down o/p voltage, re-power on to recover after fault condition removed |
||
Over Loading |
≤120% Hiccup mode,recovers automatically after fault condition is removed |
||
Over voltage |
≦140VAC(90~135V) , ≦285VAC(170~277V) |
||
Environment |
Working TEMP. |
-40~+60℃ |
|
Working Humidity |
20~90%RH,non-condensing |
||
Storage TEM.,Humidity |
-40~+80℃,10~95%RH |
||
TEMP.coefficient |
±0.03%/℃(0~50℃) |
||
Vibration |
10~500Hz,2G 10min./1 cycle,period for 60min. each along X,Y,Z axes |
||
Safety&EMC |
Safety standards |
Class P, Type HL, EN61347-1 EN61347-2-13 |
|
Withstand voltage |
I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC |
||
Isolation resistance |
I/P-O/P:100MΩ/500VDC/25℃/70%RH |
||
EMC EMISSION |
FCC Part 15 B |
||
EMC IMMUNITY |
Compliance to EN55015; EN61000-4-2,3,4,5,6,8,11, EN61547 Alight industry level (surge4KV) |
||
Others |
Weight |
About 0.35Kg |
|
Size |
178*61*24mm(L*W*H) |
||
packing |
20PCS/CTN (L*W*H) |
||
Notes |
1. All parameters NOT specially mentioned are measured at 110V/277VAC input , rated load and 25℃of ambient temperature. 2. Ripple& noise are measured at 20MHz of bandwidth by using a 12”twisted pair-wire terminated with a 0.1uf &47uf parallel capacitor. 3. Tolerance:includes set us tolerance,line regulation and load regulation . |
Mechanical Specification
※ Input (L) and (N) with wires to be connected AC.
※ Output LED SEC : Red wire to LED+, Black wire to LED-
※ Output 18AWG*2C,Blown is output(V+),Blue is output(V-)
Compatible Dimmer Type
SMARTS' 0-10v dimmer SMT50-R-D1 could work well with Smarts 0-10v dimming class 2 led power supply and Diode LED class 2 led power supply DI-DM-MW12V60W-0-10V-LPS.
Related Products
|
ETL listed 5 years warranty 12v 60w 0-10v/pwm dimmable power supply ...
Mode:SMT-012-060VD intput voltage:100~265VAC
High PF>0.90 & High efficiency>88%
waterproof rate: IP67 Aluminum case
Size: 200*68*45mm (L*W*H) |